Hello Goga, For transponders 11258, 11278 , 11449 I get no channels as well.But for 11996 I get:NationalGeo HD;SkyItalia:11996:VO0S1:S13.0E:27500:163:0;412=ita,413=eng:0:919,93B:11032:64511:6400:0Next HD;SkyItalia:11996:VO0S1:S13.0E:27500:160:0;400=ita,401=eng:0:919,93B:11030:64511:6400:0SKY Cinema HD;SkyItalia:11996:VO0S1:S13.0E:27500:161:0;404=ita,405=eng:0:919,93B:11031:64511:6400:0SKY Sport HD 1;SkyItalia:11996:VO0S1:S13.0E:27500:164:0;416=ita,417=eng:0:919,93B:11020:64511:6400:0SKY Sport HD 2;SkyItalia:11996:VO0S1:S13.0E:27500:165:0;420=eng,421=ita:0:919,93B:11033:64511:6400:0 I also get:HBO HD test;Cyfrowy Polsat S.A.:12265:VO0S0:S13.0E:27500:401:411=pol;412=pol:0:1803:3105:113:7800:0HD suisse;SRG SSR idee suisse:12399:HO0S0:S13.0E:27500:180:0;131=deu,132=fra,133=ita,134=eng:0:500:990:318:8500:0Polsat Sport HD test;Cyfrowy Polsat S.A.:12265:VO0S0:S13.0E:27500:301:311=pol:0:1803:3101:113:7800:0 which are HD channels but DVB-S. As far as your transponder file, what if you remove S2 from the end of the line describing the transponder? I have used the original S13.0E.tpl that I found in an old 0.4.1 package. Anyway, in my code I treat each transponder as DVB-S and DVB-S2, so try again and post back. This is my corresponding lines:1=11258,H,27500,232=11278,V,27500,343=11449,H,27500,234=11996,V,27500,23 Goga777 wrote:> Приветствую, Vangelis>>> it's my /etc/vdr/plugins/transponders/S13.0E.tpl (only dvb-s2 transponders)>> [SATTYPE]> 1=S13.0E> 2=Hot Bird 6/7A/8 [Ku DVB-S2]> 3=East> 4=13.0>> [DVB]> 0=4> 1=11258,H,27500,23,S2> 2=11278,V,27500,23,S2> 3=11449,H,27500,23,S2> 4=11996,V,27500,23,S2>>> I have tested in Auto mode - and without any LOCK on dvb-s2 channels :(>> May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists> May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists> May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] in : no values for "S13.0E"> May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] can`t open LoadSatTpls /etc/vdr//plugins/transponders/S13.0E.tpl.> bz2 --- try uncompressed> May 31 23:02:55 localhost vdr: [4645] virtual eOSState cMenuChannelscan::ProcessKey(eKeys) freq=1 scanMode=1> May 31 23:02:55 localhost vdr: [4645] virtual eOSState cMenuChannelscan::ProcessKey(eKeys) ssGetChannels?=0> May 31 23:02:55 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=0> May 31 23:02:55 localhost last message repeated 2 times> May 31 23:02:55 localhost vdr: [4645] start Scanning @ Card 0 ---> May 31 23:02:55 localhost vdr: [6535] transfer thread ended (pid=4645, tid=6535)> May 31 23:02:55 localhost vdr: [4645] buffer stats: 0 (0%) used> May 31 23:02:55 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=1> May 31 23:02:55 localhost vdr: [6613] maxmods = 3> May 31 23:02:55 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=1> May 31 23:02:55 localhost vdr: [6537] TS buffer on device 1 thread ended (pid=4645, tid=6537)> May 31 23:02:55 localhost vdr: [6536] buffer stats: 0 (0%) used> May 31 23:02:55 localhost vdr: [6536] receiver on device 1 thread ended (pid=4645, tid=6536)> May 31 23:02:57 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2> May 31 23:02:57 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111258 -------------> May 31 23:03:01 localhost last message repeated 2 times> May 31 23:03:01 localhost vdr: [6613] maxmods = 3> May 31 23:03:02 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument> May 31 23:03:02 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2> May 31 23:03:03 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111258 -------------> May 31 23:03:07 localhost last message repeated 2 times> May 31 23:03:07 localhost vdr: [6613] maxmods = 3> May 31 23:03:07 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2> May 31 23:03:09 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 211278 -------------> May 31 23:03:13 localhost last message repeated 2 times> May 31 23:03:13 localhost vdr: [6613] maxmods = 3> May 31 23:03:15 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument> May 31 23:03:15 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2> May 31 23:03:15 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 211278 -------------> May 31 23:03:19 localhost last message repeated 2 times> May 31 23:03:19 localhost vdr: [6613] maxmods = 3> May 31 23:03:19 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2> May 31 23:03:21 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111449 -------------> May 31 23:03:25 localhost last message repeated 2 times> May 31 23:03:25 localhost vdr: [6613] maxmods = 3> May 31 23:03:27 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument> May 31 23:03:27 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2> May 31 23:03:27 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111449 -------------> May 31 23:03:31 localhost last message repeated 2 times> May 31 23:03:31 localhost vdr: [6613] maxmods = 3>> May 31 23:03:37 localhost last message repeated 2 times> May 31 23:03:37 localhost vdr: [6613] maxmods = 3> May 31 23:03:39 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument> May 31 23:03:39 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2> May 31 23:03:39 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 211996 -------------> May 31 23:03:43 localhost last message repeated 2 times> May 31 23:03:48 localhost vdr: [4654] frontend 0 timed out while tuning to channel 0, tp 211996> May 31 23:03:48 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument> May 31 23:03:48 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2> May 31 23:03:57 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument> May 31 23:03:57 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2>>> there's some strange warnings - can somebody comment their >> May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists> May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists> May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] in : no values for "S13.0E"> May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] can`t open LoadSatTpls /etc/vdr//plugins/transponders/S13.0E.tpl.> bz2 --- try uncompressed>>> Goga777>>> >> I tested it with automatic scan (dont know if manual scan works). >> Moreover, I had selected TV+Radio (not HDTV) and the scanner pick up >> both DVB-S AND DVB-S2 channels. >> >> I did so with my S13.0E.tpl>> >> I haven't done any more testing with >> other parameters. I have Hotbird in my installation and it picked up >> in total 1626 services (TV+Radio). Maybe it missed a few (my satellite >> box gets about 2050, but this number includes data services). Moreover I >> dont know whether the file with the transponders for Hotbird ( >> (vdr-video-dir)/plugins/transponders/S13.0E.tpl ) is updated (maybe it >> is missing a few transponders.>> >> in attachment you can find updated S13.0E.tpl , but let's test with dvb-s2 version of this file - it can save our time for> dvb-s2 tests>> [SATTYPE]> 1=S13.0E> 2=Hot Bird 6/7A/8 [Ku DVB-S2]> 3=East> 4=13.0>> [DVB]> 0=4> 1=11258,H,27500,23,S2> 2=11278,V,27500,23,S2> 3=11449,H,27500,23,S2> 4=11996,V,27500,23,S2>> (for your information - I can see the open EurosportHD on 13E , and I have the hvr4000 dvb-s2 card)>>> Goga777> > ------------------------------------------------------------------------>> _______________________________________________> vdr mailing list> vdr@xxxxxxxxxxx> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr> _______________________________________________vdr mailing listvdr@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
