Hi list, There's a new version of the DVB API wrapper patch. The new version is compatible to the current multiproto drivers, and wraps the DVBFE_SET_DELSYS call. The new version is based on the vdr-1.7.0-multiproto-update.diff, and probably works also with the vdr-1.7.0-h264-....diff.bz2 patch, both from Reinhard Nissl. Chances are good that the patch will work with next VDR-1.7.1 too. The new version also introduces a new runtime detection feature: By default, builds will detect at runtime whether the driver supports multiproto, and will either use native multiproto drivers or the old API wrapper. Behavior can be configured in Make.config: DEFINES += -DDVB_MULTIPROTO_RUNTIME=1 enables the runtime detection (default) DEFINES += -DDVB_MULTIPROTO_RUNTIME=0 disables the runtime detection DEFINES += -DDVB_MULTIPROTO_WRAPPER=1 enables the API wrapper (default on old DVB headers and if runtime detection is enabled) DEFINES += -DDVB_MULTIPROTO_WRAPPER=0 disables wrapper and runtime detection. Can be used to compile multiproto without proper DVB headers. (default on new DVB headers and runtime detection disabled) Much of it is not completely tested, so reports are welcome. Get it: http://www.udo-richter.de/vdr/patches.en.html#dvb-api-wrapper http://www.udo-richter.de/vdr/patches.html#dvb-api-wrapper Cheers, Udo _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
