Igor schrieb: >>>>> I did install a second card, S2-3200, together with the multiproto driver >>>>> and vdr 1.7.0, without patches at this moment, because I am not interested >>>>> in HD at this time. I am just looking to have 2 cards working to be able >>>>> to stream on several vdr clients and use the output of my FF card. The S2 >>>>> card is on astra, and the FF on hotbird >>>>> >>>>> I started with a clean vdrconf directory, and with a channel.conf with >>>>> only 1 entry (TV5) on hotbird. I hoped that vdr would scan new channels, >>>>> but it did only for a few. >>>>> >>>>> After starting the first time, it scanned about 10 new channels and stops >>>>> there. In the DVB menu, update stands on add new transponder >>>>> >>>>> I did try with an other channel.conf. I can see every FTA channel on >>>>> hotbird, but I have a black screen on astra (nothing as channel not >>>>> available ). >>>>> >>>>> The log does nt learn me something either. In fact the log is flooded by >>>>> kernel messages about stb6100 that get_frequence and bandwith. The >>>>> frequence are always the same. >>>>> -why is the autoscan not working ? Do I need some transponder file ? >>>>> >>>>> -how can I check the signal on my S2-3200 card ? >>>>> >>>>> -how can I reduce the logs from stb6100 ? >>>>> >>>>> -do I need to apply a concurrent recording patch to be able to stream 2 or >>>>> more signals ? >>>>> >>> >>>> Errm, >>>> you say you have two FF-Cards, one connected to an LNB poniting hotbird >>>> and one connected to another LNB pointing to Astra? >>> no, he has one FF card, second one is budget card TT3200 >>> >>> Igor >>> >> Ok, but this does not make any difference in this situation, it will plain NOT work, as long as each >> card is hard-wired to only one of the LNBs. >> To get channelsacn working he will have to patch vdr (probably by himself) > > OK > >> or get at least one switch to get both satelites to both of his cards. > > sorry, I don't understand how is it proceed ? How is it possible to connect two or more cards to two or more LNB's. > Hm, back to basics of satreception... if you want more then one satelite you will need a so called diseq-switch, it has 2 ore more connectors for lnb's and one for a sat-receiver/card. you need such a switch to connect multiple lnb's to one receiver/card of vdr. if you want to connect another card to these lnb's youlneed 3 so called twin-lnb's (these habe two signal-outputs) and another diseq-switch. This is the way it's done regularly. Christoph _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
