Andreas Holzhammer - GMX wrote: > Hi, Hi! > I'm trying to track down a problem with lnbsharing and software > decoding, and am stuck at understanding what cDevice::Receiving should > actually return. > > I have two budget dvb-s cards, and use softdevice for output. > > The patch runs i through 0...numDevices and queries > device[i]->Receiving(). But for all 3 devices the call to Receiving() > returns 0? Shouldn't at least one of the devices receive the currently > viewed channel? > > vdr tuned to channel 1, channelswitch to channel 2: > > Apr 24 21:18:02 (none) user.err vdr: [15119] GMBP channel 2 device 0 LNB > 1 LNBstate 1 can provide channel 1 prio -1 receiving 0 > Apr 24 21:18:02 (none) user.err vdr: [15119] GMBP channel 2 device 1 LNB > 1 LNBstate 1 can provide channel 1 prio -1 receiving 0 > Apr 24 21:18:02 (none) user.err vdr: [15119] GMBP channel 2 device 2 LNB > 1 LNBstate 1 can provide channel 0 prio -1 receiving 0 > > What is the call to Receiving supposed to return? If it's always > returning 0 I have an idea why lnbsharing doesn't work for me :-) I don't know about lnbshare, but Receiving() (without parameter) returns true if there are any receivers on that device with a priority 0 or higher. The live view using transfer mode is using priority -1, so it does not show up. -- Anssi Hannula _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr