Hi Klaus and
thanks for getting back to me.
I tried my orginal
(ver 1.4.7) channels.conf under the new installation using this syntax
:
TF1;CSAT:11895:vC34:S19.2E:27500:171:124=fra,125=eng:53:500,100:8371:1:1074:0
As it was not
working i've generated a new channels.conf :
TF1;CSAT:11895:vO0S0:S19.2E:27500:171:124=fra,125=eng:53:0:8371:1:1074:0
I also tried to
manually edit the channel info under the OSD and put the FTA value as described
in the changelog. Then change to another channel and came back to the modified
one.
No result at all.
I'm still
investigating and i've also remarked that VDR was randomly accessing correclty
to the CAM module :
first case
:
Mar 31 07:49:04 localhost vdr: [18366] CAM 1:
no module present
Mar 31 07:49:05 localhost vdr: [18366] CAM 2: module present
Mar 31 07:49:06 localhost vdr: [18366] CAM 2: module ready
Mar 31 07:49:05 localhost vdr: [18366] CAM 2: module present
Mar 31 07:49:06 localhost vdr: [18366] CAM 2: module ready
Second case
:
Mar 31 08:42:07
localhost vdr: [18366] CAM 1: no module present
Mar 31 08:42:10 localhost vdr: [18366] CAM 2: Aston Module 1.0300, 01, 0100, 0100
Mar 31 08:42:10 localhost vdr: [18366] CAM 2: Aston Module 1.0300, 01, 0100, 0100
I came back once
more under 1.4.7 and the second case always runs OK.
preety strange
...
Pierre
On 04/20/08 08:55, Pierre-Yves Paranthoen (PERSO) wrote: > Hi, > > I've been using VDR for a while now uder an "old" 1.4.7 vdr version with a > DVB-S Nexus with CI and my official subscription card. > I wanted to upgrade to the lastest version of VDR and compiled it all OK. > But, the problem is that the new version can't switch to encrypted channels. > Is there something particular to done to enable encrypted channels ? > Particular syntax for the channels.conf file ? Please post the channels.conf entry of one of these channels. Klaus
_______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
