On 02/10/08 20:51, Rainer Zocholl wrote: > Hello > > after upgrading from 1.4.3 to 1.4.5 i am sometimes kicked off > the "live view" with warning > > "VPS-Aufnahme beginnt in Kürze" > > I can switch back to channel i want to see, but not for long. > > I have 3 FF cards so usually there would be a free card to > get the VPS signal. > > After the VPS recording has started, the card seems to be free. > > > I rember that at 1.4.3 a short discussion occurs. > One said: "That the good way, simply don't use VPS" > the other said: "I have a patch, the only disadvantage: > Your screen will blank for fractions of a second at some/every > start of recording". > > Of cause only the second solution would be the least annoying, > but obvioulsy, VDR choose the "non-user-compatible" way? :-( > > > What do have to do to avoid this annoying card locking in the VPS-margin? > > (See below only 2 transponders are involved, the system has 3(!) DVT-S FF cards.) > > > > 58:03 : [3595] timer 13 (16 2000-2017 VPS 'A') entered VPS margin > 58:04 : [3595] switching to channel 16 > 58:05 : [3754] channel 1 (Das Erste) event Son 10.02.2008 19:20-20:00 (VPS: 10.02 19:20) 'Weltspiegel' status 1 > 58:05 : [3595] info: VPS-Aufnahme beginnt in Kürze! > 58:05 : [3754] channel 10 (SWR Fernsehen BW) event Son 10.02.2008 19:58-20:00 (VPS: 10.02 19:58) 'Baden-Württemberg Wetter' status 4 > 58:05 : [3754] channel 1 (Das Erste) event Son 10.02.2008 20:00-20:15 (VPS: 10.02 20:00) 'Tagesschau' status 2 > 58:07 : [3595] timer 75 (18 2000-2010 VPS 'K') entered VPS margin > 58:18 : [3754] channel 12 (hr-fernsehen) event Son 10.02.2008 19:58-20:00 (VPS: 10.02 19:58) 'hessenschauwetter' status 4 > 58:20 : [3595] switching to channel 5 > 58:29 : [3595] switching to channel 16 > 58:30 : [3595] info: VPS-Aufnahme beginnt in Kürze! > 58:52 : [3595] switching to channel 5 > 58:58 : [3595] switching to channel 15 > 59:00 : [3595] timer 11 (3 1910-1959 'R') stop > 59:01 : [3595] switching to channel 16 > 59:01 : [3595] info: VPS-Aufnahme beginnt in Kürze! > > > vdr:/var/lib/vdr# cat timers.conf | grep -n -e "\-S:2000:" -e "\-S:19" > 11:1:S19.2E-1-1079-28007:------S:1910:1959:50:7:R: > 12:5:S19.2E-1-1079-28006:------S:1930:2014:50:6:E: > 13:5:S19.2E-1-1101-28112:------S:2000:2017:50:68:A: > 75:5:S19.2E-1-1101-28109:------S:2000:2010:50:7:K: I tried this with VDR 1.5.13 (AFAICS there was no change regarding VPS recordings in vdr.c since 1.4.7) by programming 4 recordings on 2 transponders, all with VPS. I had to increase the VPS margin to have them all within the VPS margin, but the live channel was never switched away. I have 3 DVB-S cards in my system. Does your system have 3 DVB-S cards? You wrote "DVT-S", so I'm wondering if this was just a typo. Can all your DVB-S cards be tuned independent of each other? IIRC you're using the "lnb sharing" patch, which might interfere here. Klaus _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
