> On 02/01/08 19:17, Magnus Andersson wrote: >> Hello! >> >> I have problems with channels that uses high bitrate on Thor 1W. A few >> channels uses between 10-11 Mbit/s mpeg2 and if I use tv-out from FF >> card vdr 1.5.14 the picture glitches and the remote response becomes >> really slow. It can take 10 seconds or more to change channel. There are >> no problems if I use xineliboutput and vdr 1.5.14 or channels with low >> bitrate. VDR 1.4.7 is ok with both xinliboutput plugin and tv-out from >> FF card so my question is how to log this? I start vdr with option -l 3 >> but there is nothing in the log. > > Please post the channel definitions of some of these channels. > > Klaus > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > 24;Telenor:12303:vC34M0O0S0:S1.0W:27799:523:684=sve:576:B00:3012:70:16:0 SVT2 ¬stNytt;Telenor:12303:vC34M0O0S0:S1.0W:27799:512:640=sve;641=sve:576:B00:3009:70:16:0 24 ¬stNytt;Telenor:12303:vC34M0O0S0:S1.0W:27799:523:684=sve:576:B00:3020:70:16:0 The problem is not always permanent but here a good way to reproduce the problem. Restart vdr on BBC World (FTA) channel on Thor 1W and configure vdr to start at last channel. BBC World;Telenor:11325:hC78M0O0S0:S1.0W:24500:513:644=eng:577:1:1001:70:25:0 When BBC world has started tune one of the high bitrate channels and you will see the problem. /Magnus _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
