On Fri, Jan 25, 2008 at 03:36:40PM +0000, Morfsta wrote: > No, when I apply your changes to the multiproto tree and install, > DVB-S / DVB-S2 doesn't work at all - all I get is a black screen on > DVB-S/2 delivered channels. Reverting back to the original patch works > fine. ??? you should be able to let VDR tune, but your disecq don't work, no ? > What was the change you had to make to mark the HVR4000 as a DVB-S2 > capable device? If you could isolate that bit then perhaps I could > just add that to the original multiproto + original hvr4000 patch? I wanted the driver to set DVBFE_DELSYS_DVBS2, and I found out that as I didn't need the need diseqc so I took an older one. As it worked for me so, I didn't worked anymore at it. Good luck, -- Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org http://picasaweb.google.com/Gregoire.Favre _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
