I'm having the same problem. I've put the .ax file in /usr/lib/win32, registed the key in ~/.mplayer/registry32 and then done: - # dshowserver -c CoreAVCDecoder.ax -s 1280x720 -g 09571a4b-f1fe-4c60-9760de6d310c7c31 -b 12 -f 0x34363248 -o 0x30323449 shm:/dshow_shm.(null) sem1:/dshow_sem1.(null) sem2:/dshow_sem2.(null) Opening device Called unk_IsDebuggerPresent len: 948 ProductVersion: 1.3.0.0 Decoder supports the following YUV formats: YUY2 IYUV YV12 I420 Decoder is capable of YUV output (flags 0x27) Setting fmt Starting Initialization is complete shm_open failed: No such file or directory Is dshowserver supposed to run in the background - using strace it says it's detached but I can't see it? I looked through the diff and can't find any options to enable CoreAVC in xine-lib... Must be missing something? Igor, can you point us to or translate a HOWTO? Thanks On Jan 19, 2008 4:38 PM, Per Mellander <per@xxxxxxxxxxxxx> wrote: > I have done all the patching to xine-lib, ( patch from > coreavc-for-linux-read-only + additional from happysat ). Then I've put > CoreAVCDecoder.ax in /usr/lib/win32. > > I'm running VDR with xineliboutput. > > -P "xineliboutput --fullscreen --local=sxfe --audio=alsa --remote=none" > > What more do I have to do, ( extra arguments etc. ) to use CoreAVC? When > I start VDR now I can't see any difference from using ffmpeg. > > .... > load_plugins: plugin > /usr/local/lib/xine/plugins/1.1.9/xineplug_dmx_nsv.so found > load_plugins: plugin > /usr/local/lib/xine/plugins/1.1.9/xineplug_decode_a52.so found > video_out_xv: using Xv port 275 from adaptor NV17 Video Texture for > hardware colour space conversion and scaling. > video_out_xv: this adaptor supports the yuy2 format. > video_out_xv: this adaptor supports the yv12 format. > audio_alsa_out : supported modes are 8bit 16bit 24bit 32bit mono stereo > (4-channel not enabled in xine config) (4.1-channel > not enabled in xine config) (5-channel not enabled in xine config) > (5.1-channel not enabled in xine config) (a/52 and DTS pass-through not > enabled in xine config) > xine: found input plugin : VDR (Video Disk Recorder) input plugin > input cache plugin disabled > xine: found demuxer plugin: DVD/VOB demux plugin > video_out_xv: VO_PROP_INTERLACED(1) > av_offset=0 pts > video_out_xv: VO_PROP_ZOOM_X = 100 > prebuffer=14400 pts > prebuffer=14400 pts > prebuffer=14400 pts > prebuffer=14400 pts > prebuffer=14400 pts > video: synced early > prebuffer=14400 pts > prebuffer=14400 pts > video: synced early > prebuffer=14400 pts > prebuffer=14400 pts > video: synced early > [h264 @ 0x11c43f0]non existing PPS referenced > [h264 @ 0x11c43f0]decode_slice_header error > [h264 @ 0x11c43f0]non existing PPS referenced > [h264 @ 0x11c43f0]decode_slice_header error > .... > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
