On Thursday 10 January 2008, Reinhard Nissl wrote: > Hi, > > lucian orasanu schrieb: > > it is changed after patch with function above and in > > menu.c at line 304 is expecting another function like > > this: > > > > SChannel->cChannel::SetSatTransponderData(RotorPos->R_Code(),Frequenz,Pol > >,Symbolrate,FEC_AUTO); > > > > so i modified this line in menu.c like this: > > > > SChannel->cChannel::SetSatTransponderData(RotorPos->R_Code(),Frequenz,Pol > >,Symbolrate,Symbolrate,Symbolrate,Symbolrate,Symbolrate); > > Try changing it to: > > SChannel->cChannel::SetSatTransponderData(RotorPos->R_Code(),Frequenz,Pol,S >ymbolrate,DVBFE_FEC_AUTO,DVBFE_MOD_AUTO,DVBFE_DELSYS_DVBS,DVBFE_ROLLOFF_UNKN >OWN); > > You'll need to apply the attached VDR patch instead of the one > included with vdr-rotor. > Hi, I've tested it, it seems that it works - but I have motor behind the switch (port D of 4port) and in some cases the dish doesn't went back to east (with SS1, old driver, old rotor, vdr-1.5.12 no such problem detected). In that case I have to switch to channel which is not behind portD and then back to portD and the dish begin to move. I'm using gotoX functionality. I'm using for testing: - Debian Lenny - TT S2-3200 - HH120 - vdr-1.5.13 patched by vdr-1.5.12-dvbs2-h264-syncearly-framespersec-audioindexer-fielddetection-speedup.diff, vdr-1.5.12-speedup-fix1.diff and vdr-1.5.12-speedup-fix2.diff. - rotor version vdr-rotor-0.1.4-vdr1.5.7.tgz patched by Rotor-0.1.4-vdr1.5.10.diff and vdr-1.5.12-dvbs2-h264-other-rotor.diff and with changes of SChannel->cChannel::SetSatTransponderData proposed above by Reinhard. Reinhard, if you agree I'm ready to cooperate in testing. Ales > Please keep in mind that I cannot test this patch. The suggested > line above will only support DVB-S. For DVB-S2 and H.264 support, > a lot more needs to be changed. > > Bye. _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
