> I spent the whole evening with Manu looking through the emulation > layer and cannot see any obvious errors in the DVB-T case. > Thank-you very much for your time. > Then use VDR-1.4.x (limited to only one device) and tune to a > certain DVB-T channel. Have a look what the driver reports (see > dmesg or /var/log/messages or anything else which suits your > system) at least for the set_frontend() function. > > Next use VDR-1.5.12-dvbs2-... (limited to only one device) and > tune to the same DVB-T channel. Check what the driver reports > this time. Additionally to the set_frontend() output there must a > similar output before it which shows the parameters which VDR > passed to the emulation layer. > > Please report the debug output here for further investigation. > Attached are two files - tuning to the same DVB-T channel using either system and the Philips frontend... vdr-1.4.x shows the channel fine, 1.5.12 does not. Hope this helps and thanks again for your assistance. Regards
Attachment:
vdr-1.4.x_dvbt_BBCONE.log.bz2
Description: BZip2 compressed data
Attachment:
vdr-1.5.12_dvbs2_dvbt_BBCONE.log.bz2
Description: BZip2 compressed data
_______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
