Hello Finally I wanted to update my System (SuSE 9.0 was a little outdated). This may my personal present for the New Year:-() As mentioned above I installed OpenSuse 10.3 - linux-2.6.22 I used the DVB-driver from the kernel - but was somewhat astonished about the firmware that it offered. I also suspect: I couldn't tell the driver that I have the Nexus FF card. VDR i compiled myself. The directory-Settings of SuSEs vdr are very ugly :-) But when I start vdr it goes down after few minutes - the message in the logfile says "got signal 15" ... Nobody send it. What astonishes me: Yesterday it worked for some hours reliable. This morning it restarted about every 2 - 3 minutes. (No thermal problem. The card is never hot :-) Analysis of /var/log/messages is complicated, since the stock-kernel has debugging of I2C enabled. I have to remove it. But my first goal is of course: Get vdr again reliable running. Tried to compile the dvb-driver from the vdr-wicki, but that failed. Looks like I have to live with the DVB-driver from the kernel. I really don't know, what to do best. Anybody with similar problems? Still better: anybody with a solution? Regards Wolfgang _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
