Reinhard Nissl wrote:> Hi,>> attached you'll find updated patches for VDR-1.5.12, which replace all> formerly patches regarding this subject.>> The patch named *-dvbs2-* additionally adds DVB-S2 support to VDR> (thanks to Marco Schlüßler) and requires to use the DVB drivers from the> multi-proto tree (see URL below for further details).>> The other patch is without DVB-S2 support and therefore most suitable> for DVB-C users.>> The patches have been extended to also include the recently released> audioindexer patch. Furthermore, the field detection code for H.264 has> been adopted to MPEG2, where the same issue (VDR's index.vdr addresses> frame pictures, so an index entry must not be generated for the second> field of a field picture pair) exists, though hardly used compared to H.264.>> Have a look at this page for more instructions on this concern:>> http://www.vdr-wiki.de/wiki/index.php/OpenSuSE_DVB-S2_-_Step_by_Step_Installationsanleitung_%28Achtung_Beta%29>> Bye.> > ------------------------------------------------------------------------>> _______________________________________________> vdr mailing list> vdr@xxxxxxxxxxx> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr> Hi. Big thanks to Reinhard, Manu, Claus and others who has made this possible. Using the old multiproto tree from 2007-10-25 I have SVT HD (swedish) working quite well with an S2-3200 on a 2.3GHz AMD BE-2400. My problem is that with that multiproto tree, VDR won't tune to any dvb-t channels on my nova-t 500. And with the latest multiproto tree dvb-t works but only unless I load the S2-3200 modules. If I do that VDR just hangs at startup saying nothing and doesn't answer on svdrp. Is there a way to debug this and see what's happening? Does anybody have any ideas about what's going on? If I remove the channels.conf vdr complains about that, so I know it's coming that far at least. There's no difference if I load any plugins or not. Again, I have followed all steps on the wiki and h.264+dvb-s2 works with the old multiproto, both using vdr-1.5.10 with your "old" patch and on vdr-1.5.12 with the new one. I'm running this on the 2.6.22-14-generic kernel that ships with Ubuntu 7.10. Keep up the good work,/Magnus H _______________________________________________vdr mailing listvdr@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
