Hello list, I have in a Gentoo system, a Hauppauge Nexus-S card (FF card), which is used with vdr 1.4.6 (media-video/vdr-1.4.6) and with firmware version 1 (media-tv/linuxtv-dvb-firmware-1) and dvb lib 0.5.5.1 (media-libs/libdvb-0.5.5.1-r3). De kernel is 2.6.23-gentoo-r3. In this configuration, I can recieve the FTA channels as defined in the default channels.conf (/etc/vdr/channels.conf). When a connect a 3.5 inch Hauppauge CI module (http://www.linuxtv.org/vdrwiki/index.php/Common_interface with white front panel, http://www.hauppauge.com/html/dvb_s.htm, bottom of page) to the Hauppauge Nexus card, I can no longer recieve the FTA channels (no image, no sound, no EPG, no new descriptors, no timeout on a choosen channel). It does not matter if a insert a CAM (Alphacrypt) or not. I don't have a working smartcard right now, so I did not test that. If I do insert the CAM, in the log file, the message is found: Dec 8 11:33:39 vdr_gentoo vdr: [29572] warning: Resetting CAM... Dec 8 11:33:42 vdr_gentoo vdr: [29572] info: CAM has been reset The LED on the CAM is on as well, so it has power, but still no FTA channels visible. On the mailing list was this: http://www.linvdr.org/mailinglists/vdr/2005/03/msg00573.html, which looks familiar, with one difference: In that email, nothing was stated about the FTA channels. My question is: When I have a CI module connected to the Nexus card, should I then still be able to see the FTA channels ? _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
