|
Trying to get a Genpix working with VDR. I thought my troubles started when Reinhard
posted his new vdr-1.5.12-h264-syncearly-framespersec-audioindexer-fielddetection.diff
cause I got compile errors, (should of known better). But after digging back thru all the
old patches I could find I believe this has been wrong for awhile. What is/was wrong was that the ‘switch
(frontendType)‘ function did not open and close the ‘{‘ ‘}’
properly (thankz Reinhard for pointing it out) after the patch. The original code is like this switch (frontendType) { case FE_QPSK: {
// DVB-S The patched code looks like this switch (frontendType) { case
FE_QPSK: // DVB-S case
FE_DVB_S: // DVB-S case FE_DVB_S2:
// DVB-S As you can see the last ‘{‘
is missing and a ‘}’ had tobe removed later down in the code to
make things happy. That is why I wonder how the patch has been working in the
past. I tried to add the ‘{‘
in after the S2 and leave the removed 1 in but it wouldn’t compile,
(figured that be too easy). What I have done is put the original
‘case FE_QPSK: { // DVB-S’ routine back into dvbdevice.c and have
added a new ‘case FE_DVB_S: { // DVB-S’ that mirrors ‘case
FE_QPSK: { // DVB-S’ routine and made a new ‘case FE_DVB_S2: { //
DVB-S’ routine under the switch. I am no coder by any means but can
cut and paste with the best of them. It does seem to patch and compile fine but
really unsure if what I did will be ok. Was wondering if someone with a
little more knowledge than me could take a look @ the patch and see if it all
looks ok. Thankz No virus found in this outgoing message.
|
Attachment:
vdr-1.5.12-genpix.diff
Description: Binary data
_______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
