Hi This patch has the same poblem than lnbsharing : if you installed the same card (like u have 2 SS2) , you are not sure of which one with be the first or second when the system will startup , with different sat card model you can use udev/ scripts on insmod to assign dvb device number I have resolved the lnbsharing problem by rewriting partially but not so simple with sourcescaps .. Best regards Le samedi 13 octobre 2007 18:39, Christian Schuld a écrit : > Hi Rob, > > On Samstag, 13. Oktober 2007, Rob Davis wrote: > > I would like to know if its possible to have two dvb-s cards > > connected to different disecq setups? > > > > For example, for card 1 to have: > > > > 1 - HotBird > > 2 - Astra 19 > > 3 - Astra 28 > > > > Whereas, card 2 would have: > > > > 1 - Hotbird > > 2 - Astra 19 > > > > Without it all going pear shaped? > > You'll need the "SourceCaps" patch. > It's flying around the net. I guess gentoo has a recent version of it. > > > If so, how do you reflect that in the setup? > > With that patch applied add the following lines to your setup.conf: > SourceCaps = 1 S13.0E S19.2E S28.5E > SourceCaps = 2 S13.0E S19.2E > > Christian > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
