> Built a new system with an Athlon64 x2 running and64 linux. I went with
> vdr-1.5.9. I tried to use the diseqc.conf from my old system, but vdr
> crashes in startup when the rotor plugin is used. I found the problem seems
> to be the use of commands to control the rotor in the diseqc.conf. with [E0
> 31 6B 26] and rotor plugin, vdr crashes at startup. remove ether the rotor
> plugin or all [E0 31 6B xx] entries and it starts. I used the vdr-1.5.5
> patch in the patches folder of rotor.
may be the logs in syslog from rotor plugin will help to you. For this you need to use this path
--- 1/dvbdevice.c 2007-09-07 21:54:12.000000000 +0200
+++ 2/dvbdevice.c 2007-09-10 18:52:42.000000000 +0200
@@ -168,6 +168,7 @@
dvb_frontend_event Event;
while (ioctl(fd_frontend, FE_GET_EVENT, &Event) == 0)
; // just to clear the event queue - we'll read the actual status below
+ isyslog("Rotor-command %X %X %X %X %X sent",diseqc_cmd.msg[0],diseqc_cmd.msg[1],diseqc_cmd.msg[2],diseqc_cmd.msg[3],diseqc_cmd.msg[4]);/*MIROHA*/
}
}
while (1) {
Igor
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
