On Saturday 30 June 2007 19:25, jlac vdr wrote: > Hi, > > This is a beta version of vdr which support dvb-s2. > So this version is able to watch TVHD through a streaming plugin > (streamdev plugin is include in archive). > > http://www.freewebs.com/jlacvdr/vdr-s2hd/vdr-1.4.6-s2hd-070630.tar.bz2 ONE week and no other feedback on this list :-( . At least at vdr-portal there are a few people busy on that: http://www.vdr-portal.de/board/thread.php?threadid=66165 I tried the diff file with vdr-1.4.0. Applies with a few offsets. On tuning to: Sat.1 HD:12722:hM8:S19.2E:22000:511:515:0:0:10201:0:1119:0 I can see with a slightly modified version of the patch for pat.c: for (SI::Loop::Iterator it; pmt.streamLoop.getNext(stream, it); ) { switch (stream.getStreamType()) { case 0x19: // advanced codec HD digital television service case 0x1b: //ISO/IEC 14496-10 Video (MPEG-4 part 10/AVC, aka H.264) printf("stream pid:%d (0x%04x) type 0x%04x\n",stream.getPid(), stream.getPid(), stream.getStreamType()); stream pid:255 (0x00ff) type 0x001b stream pid:511 (0x01ff) type 0x001b stream pid:255 (0x00ff) type 0x001b stream pid:511 (0x01ff) type 0x001b ERROR: no useful data seen within 10494724 byte of video stream >From syslog: Jul 7 13:47:46 jarada vdr: [18639] TS buffer on device 1 thread started (pid=18612, tid=18639) Jul 7 13:47:46 jarada vdr: [18640] ERROR: invalid Count in cRingBufferLinear::Del: 0 (limited to -1742158149) Jul 7 13:47:47 jarada vdr: [18637] PES packet shortened to 702 bytes (expected: 1806 bytes) Jul 7 13:47:47 jarada vdr: [18637] cAudioRepacker(0xC0): skipped 992 bytes while syncing on next audio frame Jul 7 13:47:47 jarada vdr: [18618] changing pids of channel 901 from 255+255:259:0 to 255+255:0;259=deu:0 Jul 7 13:47:48 jarada vdr: [18618] changing pids of channel 902 from 511+511:515:0 to 511+511:0;515=deu:0 Jul 7 13:47:48 jarada vdr: [18612] retuning due to modification of channel 902 Jul 7 13:47:48 jarada vdr: [18612] switching to channel 902 Jul 7 13:47:48 jarada vdr: [18637] transfer thread ended (pid=18612, tid=18637) Looks like data gets not passed via remuxer to softdevice :-( . > > The DVB-S2 channels must have 'M8' in modulation field of channels.conf, > for example: > ASTRAPROMO_HD:12721:hC23M8:S19.2E:22000:767:768:0:0:10202:1:1119:0 > > > tested with: > - linux 2.6.19 > - TT3200 card (manu drivers and laasa patch) Tested with: - linux 2.6.21-5 - Technisat SkyStar HD 02:06.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) Subsystem: Technotrend Systemtechnik GmbH Unknown device 1019 Flags: bus master, medium devsel, latency 32, IRQ 20 Memory at feaffc00 (32-bit, non-prefetchable) [size=512] jarada stefan # lspci -v -n -s 02:06.0 02:06.0 0480: 1131:7146 (rev 01) Subsystem: 13c2:1019 Flags: bus master, medium devsel, latency 32, IRQ 20 Memory at feaffc00 (32-bit, non-prefetchable) [size=512] -- Stefan Lucke _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
