> Hi > > I've recently got my TT-1500C, CI and Irdeto CAM working. My cable > provider > only provides encrypted channels, so can't do any testing free-to-air > channels. > > Here's my modprobe in dmesg: > saa7146: register extension 'budget_ci dvb'. > ACPI: PCI Interrupt Link [PIN3] enabled at IRQ 15 > PCI: setting IRQ 15 as level-triggered > ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [PIN3] -> GSI 15 (level, low) > -> > IRQ 15 > saa7146: found saa7146 @ mem d09e2e00 (revision 1, irq 15) > (0x13c2,0x1010). > saa7146 (0): dma buffer size 192512 > DVB: registering new adapter (TT-Budget-C-CI PCI). > adapter has MAC addr = 00:d0:5c:67:bf:11 > input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input5 > budget_ci: CI interface initialised > DVB: registering frontend 0 (ST STV0297 DVB-C)... > > Here's my log from VDR: > Jun 4 22:06:56 media1 kernel: dvb_ca adapter 0: DVB CAM detected and > initialised successfully > Jun 4 22:06:56 media1 vdr: [2359] CAM 1: module ready > Jun 4 22:06:57 media1 vdr: [2363] setting current skin to "sttng" > Jun 4 22:06:57 media1 vdr: [2363] loading > /media/video/vdr-1.5.2/themes/sttng-default.theme > Jun 4 22:06:58 media1 vdr: [2359] CAM 1: Irdeto Access, 01, 06FF, 06FF > Jun 4 22:07:02 media1 vdr: [2355] switching to channel 54 > Jun 4 22:07:02 media1 vdr: [2355] setting current skin to "curses" > Jun 4 22:07:06 media1 vdr: [2355] retuning due to modification of channel > 54 > Jun 4 22:07:06 media1 vdr: [2355] switching to channel 54 > Jun 4 22:07:25 media1 vdr: [2374] ERROR: no useful data seen within > 10582520 byte of video stream > Jun 4 22:07:31 media1 vdr: [2355] switching to channel 2 > Jun 4 22:07:32 media1 vdr: [2355] retuning due to modification of channel > 2 > Jun 4 22:07:32 media1 vdr: [2355] switching to channel 2 > Jun 4 22:07:54 media1 vdr: [2380] ERROR: no useful data seen within > 10576880 byte of video stream > > Here's my kernel messages: > dvb_ca adapter 0: DVB CAM detected and initialised successfully > > > Can anyone suggest any other testing I can do?? It looks like it should > be > working? Looks like, from previous threads, this "retuning due to modification of channel" problem is known? Perhaps my channels.conf is wrong? Entries look like this: E!;T:570000:M64:C:####:305:306=eng:0:1:101:182:1:0 World TV1;T:570000:M64:C:####:385:386=eng:0:1:102:182:1:0 The Arts Channel;T:570000:M64:C:####:35:34=eng:0:1:103:182:1:0 "####" - I've stripped the Symbol Rate from this post as my provider protects this. The rest is as per 'scan' produced. Any ideas? _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
