By the way, the switch is Diseqc 2.0. If I remove the cable going to the card and plug it back while channel is set on the port #1 the reception works. After first diseqc command sent to the switch it doesn't work anymore. On 1/27/07, Ilariu Raducan <ilariu@xxxxxxxxx> wrote: > > Hi all, > > Could somebody help me with this one? > > I Got 2 Edision switches and 4 quad LNBs to use it with 3 receivers (I > still have the old switch). > With the old switch (not Edision) everything works OK. > With Edision switches no channel locks, the signal is not stable. I > presume the problem is with diseqc.conf. > > I used the following 2 files that work with the old switch but not with > the new ones: > diseq-ab.conf > # port 1 > S5.0E 11700 V 9750 t v W15 [E0 10 23] W15 [E0 10 22] W15 t > S5.0E 99999 V 10600 t v W15 [E0 10 23] W15 [E0 10 22] W15 T > S5.0E 11700 H 9750 t V W15 [E0 10 23] W15 [E0 10 22] W15 t > S5.0E 99999 H 10600 t V W15 [E0 10 23] W15 [E0 10 22] W15 T > > # port 2 > S13.0E 11700 V 9750 t v W15 [E0 10 23] W15 [E0 10 26] W15 t > S13.0E 99999 V 10600 t v W15 [E0 10 23] W15 [E0 10 26] W15 T > S13.0E 11700 H 9750 t V W15 [E0 10 23] W15 [E0 10 26] W15 t > S13.0E 99999 H 10600 t V W15 [E0 10 23] W15 [E0 10 26] W15 T > > # port 3 > S16.0E 11700 V 9750 t v W15 [E0 10 27] W15 [E0 10 22] W15 t > S16.0E 99999 V 10600 t v W15 [E0 10 27] W15 [E0 10 22] W15 T > S16.0E 11700 H 9750 t V W15 [E0 10 27] W15 [E0 10 22] W15 t > S16.0E 99999 H 10600 t V W15 [E0 10 27] W15 [E0 10 22] W15 T > > # port 4 > S19.2E 11700 V 9750 t v W15 [E0 10 27] W15 [E0 10 26] W15 t > S19.2E 99999 V 10600 t v W15 [E0 10 27] W15 [E0 10 26] W15 T > S19.2E 11700 H 9750 t V W15 [E0 10 27] W15 [E0 10 26] W15 t > S19.2E 99999 H 10600 t V W15 [E0 10 27] W15 [E0 10 26] W15 T > > diseq-full.conf > S5.0E 11700 V 9750 t v W15 [E0 10 38 F0] W15 t > S5.0E 99999 V 10600 t v W15 [E0 10 38 F1] W15 T > S5.0E 11700 H 9750 t V W15 [E0 10 38 F2] W15 t > S5.0E 99999 H 10600 t V W15 [E0 10 38 F3] W15 T > > S13E 11700 V 9750 t v W15 [E0 10 38 F4] W15 t > S13E 99999 V 10600 t v W15 [E0 10 38 F5] W15 T > S13E 11700 H 9750 t V W15 [E0 10 38 F6] W15 t > S13E 99999 H 10600 t V W15 [E0 10 38 F7] W15 T > > > S16.0E 11700 V 9750 t v W15 [E0 10 38 F8] W15 t > S16.0E 99999 V 10600 t v W15 [E0 10 38 F9] W15 T > S16.0E 11700 H 9750 t V W15 [E0 10 38 FA] W15 t > S16.0E 99999 H 10600 t V W15 [E0 10 38 FB] W15 T > > S19.2E 11700 V 9750 t v W15 [E0 10 38 FC] W15 t > S19.2E 99999 V 10600 t v W15 [E0 10 38 FD] W15 T > S19.2E 11700 H 9750 t V W15 [E0 10 38 FE] W15 t > S19.2E 99999 H 10600 t V W15 [E0 10 38 FF] W15 T > > > > Please help !! > > Thank you, > Regards, > Ilariu > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.linuxtv.org/pipermail/vdr/attachments/20070128/989c6085/attachment.htm
