On Sat, Jan 27, 2007 at 11:41:18AM +0100, Reinhard Nissl wrote:
> Hi,
Hello,
> Well, I've tried to switch between those two channels and had no problem
> on my system (two budget cards).
I have also no problem under kaffeine :-)
> My setup is similar to your's (all cards connected to a single multi
> switch) except that I lack the third LNB for 28.2E.
I don't know if that exactly similar :
Astra 19.2E Hotbird 13.0E Astra 28.2E
quad lnb quad lnb quad lnb
4 cables 4 cables 4 cables
\\\\ |||| ////
\\\\ |||| ////
\\\\ |||| ////
\\\\ vnc G3 G3 ////
diseqc
1.0
3 output
/ | \
/ | \
/ | \
/ | \
dvb1 dvb2 dvb3
> I think, your diseqc.conf should look like that:
>
> # Optimized for full DiSEqC:
>
> S19.2E 11700 V 9750 [E0 10 38 F0]
> S19.2E 99999 V 10600 [E0 10 38 F1]
> S19.2E 11700 H 9750 [E0 10 38 F2]
> S19.2E 99999 H 10600 [E0 10 38 F3]
>
> S13.0E 11700 V 9750 [E0 10 38 F4]
> S13.0E 99999 V 10600 [E0 10 38 F5]
> S13.0E 11700 H 9750 [E0 10 38 F6]
> S13.0E 99999 H 10600 [E0 10 38 F7]
>
> S28.2E 11700 V 9750 [E0 10 38 F8]
> S28.2E 99999 V 10600 [E0 10 38 F9]
> S28.2E 11700 H 9750 [E0 10 38 FA]
> S28.2E 99999 H 10600 [E0 10 38 FB]
I have tried it, and it don't work at my place ???
Well, I can tune to some channels :
Vertical loband on Astra 19.2E
Vertical loband on Hotbird 13.0E,
Vertical ones on Astra 28.2E.
Thank for your answer, I would like to convert the setup from kaffeine
into vdr's diseqc.conf :
DVB0=S|Astra-19.2E|Hotbird-13.0E|Astra-28.2E
DVB0_LNB0_hi=10600
DVB0_LNB0_lo=9750
DVB0_LNB0_switch=11700
DVB0_LNB1_hi=10600
DVB0_LNB1_lo=9750
DVB0_LNB1_switch=11700
DVB0_LNB2_hi=10600
DVB0_LNB2_lo=9750
DVB0_LNB2_switch=11700
DVB0_LNB3_hi=10600
DVB0_LNB3_lo=9750
DVB0_LNB3_switch=11700
Which is the same for DVB1 and DVB2.
I would really enjoy if someone could explain me how to use the same
settings as kaffeine use :-)
Have a great day,
--
Gr?goire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org
