Well,
using the following :
S19.2E 11700 V 9750 t v W15 [E0 10 38 F0] W15 t
S19.2E 99999 V 10600 t v W15 [E0 10 38 F1] W15 T
S19.2E 11700 H 9750 t V W15 [E0 10 38 F2] W15 t
S19.2E 99999 H 10600 t V W15 [E0 10 38 F3] W15 T
S13.0E 11700 V 9750 t v W15 [E0 10 38 F4] W15 t
S13.0E 99999 V 10600 t v W15 [E0 10 38 F5] W15 T
S13.0E 11700 H 9750 t V W15 [E0 10 38 F6] W15 t
S13.0E 99999 H 10600 t V W15 [E0 10 38 F7] W15 T
S28.2E 11700 V 9750 t v W15 [E0 10 38 F8] W15 t
S28.2E 99999 V 10600 t v W15 [E0 10 38 F9] W15 T
S28.2E 11700 H 9750 t V W15 [E0 10 38 FA] W15 t
S28.2E 99999 H 10600 t V W15 [E0 10 38 FB] W15 T
works perfectly for cards 0 and 2, but not together.
card 1 can't tune to anything else than astra 19.2E ???
And I don't understand why -D0 -D2 don't work neither ?
> And you are telling this NOW. The necessary diseqc setup
> is VERY different for simple "universal" LNBs and quad LNBs.
>
> I bet your LNBs have four outputs for each combination
> of hi/lo freq and polarization.
No, I can connect the DVB cards to any output of the LNB and it
decodes the signal very well.
I am bad a drawing but I try :
************************** **************************
*************************
* Astra 19.2E quad lnb * * Hotbird 13E quad lnb * *Astra 28.2E quad lnb *
************************** **************************
*************************
| | | | | | |
| | | | |
| | | | | | |
| | | | |
************************************************
* disecq 1.0 connected to the 3 lnb and that *
* have four outputs to connect my DVB-s *
************************************************
> You really have to know how the LNBs are coupled to
> the diseqc switch. Do you have something like 16x2 switch?
> That means, inputs for four quad LNBs and outputs
> for two (or even more) receivers.
No, quiete simpler here.
> No, diseqc.conf designed to be used with universal LNBs
> and a diseqc switch is very unlikely to work for your setup.
Well, it works more or less...
Thank,
--
Gr?goire FAVRE
