Have you an old TPS SmartCard or a recent one (Model W or X). vdr and other terminal (with CAM modules) works only with W or X models, whilst the TPS reciever can handle old ones. > Message du 05/09/06 00:13 > De : "Marco G?benich" <mg@xxxxxxxxxxxx> > A : "VDR Mailing List" <vdr@xxxxxxxxxxx> > Copie ? : > Objet : Re: TF1 problem [was: Viaccess Cam Update] > > Hi! > > This would not work while my original TPS receiver has only a slot for > the smartcard, not for a CAM. > > Has nobody else problems to receive TF1? > > Am I the first person who tries to update CAM firmware with VDR? > > Regards > > Marco > > > > Gregoire Favre schrieb: > > On Mon, Sep 04, 2006 at 11:47:15AM +0200, Marco G?benich wrote: > > > > > >> Has nobody a glue on this! > >> > > > > Take your CAM, put it on an official TPS receiver, tune on it to the specified > > transponder, wait... and take your CAM back to your VDR box... > > > > I haven't tested it, but I am quiete certain it should work :-) > > > > > -- > vierzehn Bahnhofstr. 27 Telefon 0 26 32 / 98 98 - 120 > public relations 56626 Andernach Telefax 0 26 32 / 98 98 - 111 > GmbH & Co. KG E-Mail: mg@xxxxxxxxxxxx > > > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > >
