Udo Richter wrote: > Jukka Palko wrote: >> I have been running vdr 1.4 version with rather good success for some >> time now, but now all of a sudden I have started getting almost >> continuous restarting of vdr. >> >> Aug 23 09:31:11 sempron vdr: [16318] ERROR: video data stream broken >> >> Cards in machine are: >> # lspci -v -s 0a.0 >> 00:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) >> Subsystem: Technotrend Systemtechnik GmbH >> Technotrend/Hauppauge DVB card rev2.1 >> >> sempron ~ # lspci -v -s 0d.0 >> 00:0d.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) >> Subsystem: Technotrend Systemtechnik GmbH >> Technotrend/Hauppauge DVB card rev2.1 > > Did you check that its not just the second card that has failures? For > example, try switching live view to the second card using femon, or > start VDR with -D 1 -D 0 to use the second card as primary. I doublechecked things on the host a while back and looks like the cause is clock adjustment. :) After disabling the adjustment from transmissions, the continuous restarting ended. Propably ain't got the priviledges set up properly. ;) Aug 23 10:00:32 sempron vdr: [19692] System Time = Wed Aug 23 10:00:32 2006 (1156316432) Aug 23 10:00:32 sempron vdr: [19692] Local Time = Wed Aug 23 10:01:08 2006 (1156316468) Aug 23 10:01:08 sempron vdr: [19710] ERROR: video data stream broken Aug 23 10:01:08 sempron vdr: [19710] initiating emergency exit Aug 23 10:01:08 sempron vdr: [19670] emergency exit requested - shutting down Thanks for the suggestion still. -Jukka -- Jukka Palko jpalko@xxxxxxxxx
