On Wed, 2006-08-16 at 22:06 -0400, Dave wrote: > >From what Im reading, the air2pc ATSC card only supports 8VSB, no > support for QAM at all. > > > hmm... but this is what I get with dvbsnoop: dvbsnoop -s feinfo -adapter 1 dvbsnoop V1.4.00 -- http://dvbsnoop.sourceforge.net/ --------------------------------------------------------- FrontEnd Info... --------------------------------------------------------- Device: /dev/dvb/adapter1/frontend0 Basic capabilities: Name: "Broadcom BCM3510 VSB/QAM frontend" Frontend-type: unkonwn Frequency (min): 54000.000 Frequency (max): 803000.000 Frequency stepsiz: 0.000 Frequency tolerance: 0 Symbol rate (min): 0.000000 MSym/s Symbol rate (max): 0.000000 MSym/s Symbol rate tolerance: 0 ppm Notifier delay: 0 ms Frontend capabilities: auto inversion FEC 1/2 FEC 2/3 FEC 3/4 FEC 5/6 FEC 7/8 FEC AUTO QAM 16 QAM 64 QAM 128 QAM 256 Current parameters: Error(95): frontend ioctl: Operation not supported Damn, maybe this is only the frontend too -- perhaps I have a card I can't use. Norm -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.linuxtv.org/pipermail/vdr/attachments/20060817/b178e3ff/attachment.htm
