Sadly, no. I picked this card up on Ebay for $30 *S* so if it works out then great! Solves my analog issues too. Can anyone offer a suggestion on this problem? I have tried to limit vdr to only looking at the ATSC card and it made no difference. Norm On Wed, 2006-08-16 at 08:40 -0700, Simon Baxter wrote: > Have you made any progress on this? > > I've been waiting for someone to respond - if you can get the card working, > I'd consider getting one > ----- Original Message ----- > From: "mlists" <mlists@xxxxxxxxxxx> > To: "VDR Mailing List" <vdr@xxxxxxxxxxx> > Sent: Tuesday, August 15, 2006 5:51 AM > Subject: VDR with ATSC card -- need help > > > > Hi there, > > > > I have an Air2PC Skystar 2 card and a Twinhan 1020a. I've been using > > the Twinhan for several years now with VDR and am quite happy with how > > its working. > > > > I recently added the Air2PC card. Both are seen by the OS: > > 00:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video > > Capture (rev 11) > > 00:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture > > (rev 11) > > 00:0c.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII > > DVB chip / Technisat SkyStar2 DVB card (rev 02) > > > > The twinhan is under /dev/dvb/adapter0 and the Air2PC is > > under /dev/dvb/adapter1. > > > > VDR verion 1.4.1-3 > > > > I confirmed in my sources.conf that I have an entry for C Cable. Would > > that be what to use for ATSC Cable (North America)? > > > > This is the single channel line I'm using to try and get this working: > > :@6 > > A-Channel:729:C0M256:C:0:21:24:0:1:6:0:0:0 > > Details are: > > Freq (Mhz) 729.0 > > QAM_256 > > C > > Video PID 21 > > Audio PID 24 > > CA 1 (for card number 1? -- does this start at 0? I've tried different > > numbers here) > > SID 6 (Same as channel I believe) > > > > Every attempt to change to this channel results in a "Channel not > > Available". > > > > Any suggestions?? > > > > Thanks in advance! > > Norm > > > > > > _______________________________________________ > > vdr mailing list > > vdr@xxxxxxxxxxx > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > > > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
