hi, OK, now I know you are aware of this problem thanks for your reply I'll wait and hope :-) marco On Tue, 8 Aug 2006, Klaus Schmidinger wrote: > Marco Skambraks wrote: > > hi, > > > > I use a technotrend dvb-c 2.3 premium card with latest firmware 2623 and > > almost the latest dvb drivers > > and also one CAM for RTL, SAT1 etc. and one for premiere > > if I switch to an encrypted channel like premiere - vdr always try to get > > the key from both CAMs > > that results in a CAM message like this: > > "Sie haben keine Berechtigung f?r diesen Sender" > > so, I turned the smartcard-messages off (CAM menu) > > now it seems that it is OK, but sometimes it takes a long time to switch > > from one premiere-channel to another > > if I remove the iesy-smartcard (iesy - my cable provider in hessen) > > switching channels is much faster > > In VDR version 1.4 the CA_PMT records (that's the data a CAM needs in > order to know which PIDs it shall decrypt) are sent to all CAMs in > one CI device. I know that this can be a problem, and that's why I'm > going to address this first thing in the upcoming 1.5 developer > version. > > Sorry, but at the moment I guess turning off the CAM messages is > all you can do. > > Klaus > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > -------------------------------------------------- AMMEC - Accessible Multimedia Entertainment Center http://www.ammec.de Email: Marco Skambraks <marco@xxxxxxxx>
