VDR experts (Klaus), I'm experiencing similar problems as e.g. reported in [1] with a Wideview-based DVB-T USB stick (Prolink Pixelview PlayTV 505 DVB-T) and VDR. While the adapter works well with kaffeine, VDR reports a "can't open filter handle" error when switching channels *within* a bouquet. On the other hand, tuning to a channel on a *different* bouquet works (see below). This was tested with a vanilla 2.6.17.4 kernel and VDR 1.4.1-1ctvdr2 from e-tobi. As I understand from [2], the problem is related to the hardware PID filter of the adapter, which can't be disabled. Is it possible to find a fix or workaround for VDR so that it works with this type of adapter? I'd be glad if someone with a deeper understanding of VDR could shed some light on this issue, and I'd be happy to run any tests. Regards. Matthias [1] http://www.linuxtv.org/pipermail/linux-dvb/2006-June/010655.html [2] http://www.linuxtv.org/pipermail/linux-dvb/2006-June/010682.html Jul 16 13:01:56 tyron vdr: [6188] switching to channel 5 Jul 16 13:01:56 tyron vdr: [6922] transfer thread ended (pid=6922, tid=6922) Jul 16 13:01:56 tyron vdr: [6924] TS buffer on device 1 thread ended (pid=6924, tid=6924) Jul 16 13:01:56 tyron vdr: [6923] buffer stats: 41172 (1%) used Jul 16 13:01:56 tyron vdr: [6923] receiver on device 1 thread ended (pid=6923, tid=6923) Jul 16 13:01:56 tyron vdr: [6188] cTS2PES got 1 TS errors, 1 TS continuity errors Jul 16 13:01:56 tyron vdr: [6188] buffer stats: 41548 (1%) used Jul 16 13:01:56 tyron vdr: [6927] transfer thread started (pid=6927, tid=6927) Jul 16 13:01:56 tyron vdr: [6928] receiver on device 1 thread started (pid=6928, tid=6928) Jul 16 13:01:56 tyron vdr: [6929] TS buffer on device 1 thread started (pid=6929, tid=6929) Jul 16 13:01:57 tyron vdr: [6927] setting audio track to 1 (0) Jul 16 13:02:05 tyron vdr: [6188] switching to channel 4 Jul 16 13:02:05 tyron vdr: [6927] transfer thread ended (pid=6927, tid=6927) Jul 16 13:02:05 tyron vdr: [6929] TS buffer on device 1 thread ended (pid=6929, tid=6929) Jul 16 13:02:05 tyron vdr: [6928] buffer stats: 61100 (2%) used Jul 16 13:02:05 tyron vdr: [6928] receiver on device 1 thread ended (pid=6928, tid=6928) Jul 16 13:02:05 tyron vdr: [6188] buffer stats: 79712 (3%) used Jul 16 13:02:05 tyron vdr: [6933] transfer thread started (pid=6933, tid=6933) Jul 16 13:02:05 tyron vdr: [6934] receiver on device 1 thread started (pid=6934, tid=6934) Jul 16 13:02:05 tyron vdr: [6935] TS buffer on device 1 thread started (pid=6935, tid=6935) Jul 16 13:02:06 tyron vdr: [6933] setting audio track to 1 (0) Jul 16 13:02:11 tyron vdr: [6188] switching to channel 3 Jul 16 13:02:11 tyron vdr: [6933] transfer thread ended (pid=6933, tid=6933) Jul 16 13:02:11 tyron vdr: [6935] TS buffer on device 1 thread ended (pid=6935, tid=6935) Jul 16 13:02:11 tyron vdr: [6934] buffer stats: 44556 (2%) used Jul 16 13:02:11 tyron vdr: [6934] receiver on device 1 thread ended (pid=6934, tid=6934) Jul 16 13:02:11 tyron vdr: [6188] buffer stats: 44932 (2%) used Jul 16 13:02:11 tyron vdr: [6188] ERROR: can't open filter handle on '/dev/dvb/adapter0/demux0' Jul 16 13:02:11 tyron vdr: [6188] ERROR: /dev/dvb/adapter0/demux0: Too many open files Jul 16 13:02:11 tyron vdr: [6188] ERROR (dvbdevice.c,690): Too many open files Jul 16 13:02:11 tyron vdr: [6188] ERROR: can't set PID 49 on device 1 Jul 16 13:02:11 tyron vdr: [6188] ERROR (dvbdevice.c,705): Bad file descriptor Jul 16 13:02:11 tyron vdr: [6938] transfer thread started (pid=6938, tid=6938)
