I have built and installed LIRC with the configure switch for the AT Usb device. I have /dev/lircd and /dev/lirc0 - permissions are correct. I have a lircd.conf which is setup correctly for my remote control. lircd would not run because /dev/lirc did not exist so I just created a symlink to lirc0 which works fine. I can execute lircd fine. irw executes as well and catches all the remote control presses so the remote control is working fine. I am using VDR 1.3.38 which I made with make REMOTE=LIRC NO_KBG=1 I then startup VDR and it wants to setup the RC unit... it does not recognise any button presses. /var/log/syslog is still saying setting up KBD ??? Jan 17 02:36:18 localhost vdr[6413]: remote control KBD - learning keys Jan 17 02:36:18 localhost vdr[6413]: KBD remote control thread started (pid=6413, tid=6422) I forced --lirc=/dev/lircd --no-kbd onto the command when I execute vdr. syslog now says Jan 17 02:24:57 localhost vdr[6367]: remote control LIRC - learning keys Jan 17 02:24:57 localhost vdr[6367]: LIRC remote control thread started (pid=6367, tid=6376) No other messages in the log but still not doing anything when I hit keys on the remote :( any ideas folks?? Chris -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.linuxtv.org/pipermail/vdr/attachments/20060117/233b0090/attachment-0001.htm
