* Seppo Ingalsuo <seppo.ingalsuo@xxxxxx> [051211 15:22]: >If I enable update transponders setting one (C-mux) of the available three (A,B,C) multiplexes gets >updated to non-working frequency. Example: >"The Voice;SBS:770000:I0C23M64B8T8G8Y0:T:27500:513:660=fin:0:0:241:8438:12289:0" >becomes >"The Voice;SBS:674000000:I0C23D23M64B8T8G8Y0:T:27500:513:660=fin:0:0:241:8438:12289:0" >The same happens for other TV and radio channels in the same frequency. It is funny that the in >addition to wrong frequency there are also three extra zeros in the updated frequency. I contacted >the Finnish operator (Digita) and was lucky to get in contact with a helpful person. He verified >that other NIT data is sent correctly here in Tampere so I wonder now if the problem is in vdr. He >also told that the NIT data is sent in two parts, first A and B and then C separately. Could it >cause that A and B work but not C. Something like this happens in Spain. DVB-T channels are updated by vdr with an extra milliard (the thre 0s). Actually I see two copies of each channel. The right one with which I populate channels.conf to start with and another copy added by vdr with the three extra 0s. In addition, vdr sometimes updates fully operational channels to wrong values, which results in a blank screen. All is solved disabling the 'Update channels' option, though. -- Look out! Behind you! Javier Marcet <javier@xxxxxxxxxxx>
