Hi, the attached patch introduces some timeouts while the device is tuning and when it looses the lock: DISEQC_REPEAT_TIMEOUT (500 ms) is used to repeat the DiSEqC signalling in case the where a multiswitch receives at first a malformed message and therefore doesn't switch. TUNE_TO_RETUNE_TIMEOUT (3000 ms) is used to instruct the device to start the tuning operation once again in case the above DiSEqC signalling doesn't work. LOST_LOCK_TO_RETUNE_TIMEOUT (500 ms) lets the device retune after a LOCKED to NOT LOCKED transition, probably under bad reception conditions. Please give the patch a try and report success or failure. Tests of special interest: - bad reception conditions (DVB-T) - steering dishes Bye. -- Dipl.-Inform. (FH) Reinhard Nissl mailto:rnissl@xxxxxx -------------- next part -------------- A non-text attachment was scrubbed... Name: vdr-1.3.37-tuner.patch Type: text/x-patch Size: 3393 bytes Desc: not available Url : http://www.linuxtv.org/pipermail/vdr/attachments/20051204/639b82b7/vdr-1.3.37-tuner.bin
