Udo Richter wrote: > J?rg Schneide wrote: >>I want to use RC5 keycodes with different adresses in the remote.conf >>because my RC uses different ones for the normal (TV) keys and the keys for >>the VCR-control. > > This is a limit of the DVB IR driver interface. The driver interface > only transmits codes from a single RC5 address, or alternatively ignores > the RC5 address completely and maps all codes together, probably mapping > different keys to one code. > > This leaves one solution: Patching the DVB driver. I've been using a > patch for a long time that hard-codes up to three additional RC5 > addresses to unused code numbers, eg. codes 0-63 from one programmable > RC5 address as before, and 64-255 are hard-coded. Let me know if you're > interested. > Another "solution" I'm using for a long time: "Declare" the lower 2 address bits to be data bits, getting 8 bits data and 3 bits address. Then map the 256 RC codes to keycodes with av7110_loadkeys as usual. Wolfgang > Cheers, > > Udo > > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr >
