----- Original Message ----- From: "Carsten Koch" <Carsten.Koch@xxxxxxxx> To: "Video Disk Recorder Mailing List" <vdr@xxxxxxxxxxx> Sent: Sunday, September 11, 2005 7:44 PM Subject: SourceCaps patch for VDR 1.3.32. > The attached patch allows a VDR system with multiple > cards to attach each card to an individual dish > pointing at a different satellite. > > I have 3 DVB cards in my VDR system: > > 1) FF card connected to one output of LNB at a dish > pointed at Astra 19.2E. > > 2) budget card connected to another output of LNB at a dish > pointed at Astra 19.2E. > > 3) budget card connected to output of LNB at a dish > pointed at Eutelsat 13.0E. > > I am using the following entries for that in my setup.conf: > > SourceCaps = 1 S19.2E > SourceCaps = 2 S19.2E > SourceCaps = 3 S13.0E > Hello, I have 2 DVB cards in my VDR system 1) FF card for Astra 19.2E and Eutelsat 13.0E. 2) budget card for Astra 19.2E > I am using the following entries for that in my setup.conf: > > SourceCaps = 1 S19.2E S13.0E > SourceCaps = 2 S19.2E With vdr 1.3.22 - included patch for vdr 1.3.18 - sourcecaps-patch works fine (only the automatic scan for new channels produced mistakes). Now i have tested this patch with vdr 1.3.34, but the first entry of SourceCaps in setup.conf will be ignored and is deleted after shutdown vdr. Any suggestions? Thanks Frank
