On Fri, 10 Jun 2005, Simon Baxter (SB) wrote:
SB> nvram-wakeup: value of the addr_stat byte is: 0x9F.
SB> nvram-wakeup: value of the addr_day byte is: 0xFF.
SB> nvram-wakeup: value of the addr_hour byte is: 0xFF.
SB> nvram-wakeup: value of the addr_min byte is: 0xFF.
SB> nvram-wakeup: value of the addr_sec byte is: 0xFF.
SB> nvram-wakeup: value of the addr_chk_h byte is: 0x1A.
SB> nvram-wakeup: value of the addr_chk_l byte is: 0x74.
SB> nvram-wakeup: Checksum is: 0x1A74.
SB> nvram-wakeup: WakeUp Hour value (31) not correct.
Please go into your BIOS Setup, enable the wakeup and _change_ every value
(day, hour, minute, second) of the wakeup time.
Then try running nvram-wakeup again.
On some boards this procedure will "initialize" the stored values to
values which make sense.
Sergei
--
-------------------------------------------------------------------- -?)
eMail: Sergei.Haller@xxxxxxxxxxxxxxxxxxx /\\
-------------------------------------------------------------------- _\_V
Be careful of reading health books, you might die of a misprint.
-- Mark Twain
