I added some debug output for every 1000th call to poll() in cSectionHandler::Action At 23:58 a recording started. Since then the thread for my 2nd device (first and primary is Nexus-S FF, 2nd is TT PCI Budget) also polls much more even after the recording finished. Why is there so much activity going on for the 2nd device even when it is no longer needed? Is there any way to tell vdr that no output is needed such that vdr can stop processing the data stream of the first device too? Why does the first device call poll() twice as much as the second one? Mar 22 23:57:55 mm vdr[20430]: pcount in cSectionHandler::Action:12209000 Mar 22 23:57:59 mm vdr[20430]: pcount in cSectionHandler::Action:12210000 Mar 22 23:58:00 mm vdr[20426]: timer 1 (28 0000-0055 'Zimmer frei!') entered VPS margin Mar 22 23:58:00 mm vdr[20426]: switching device 2 to channel 28 Mar 22 23:58:02 mm vdr[20430]: pcount in cSectionHandler::Action:12211000 Mar 22 23:58:05 mm vdr[20430]: pcount in cSectionHandler::Action:12212000 Mar 22 23:58:08 mm vdr[20433]: pcount in cSectionHandler::Action:1000 Mar 22 23:58:08 mm vdr[20430]: pcount in cSectionHandler::Action:12213000 Mar 22 23:58:11 mm vdr[20430]: pcount in cSectionHandler::Action:12214000 Mar 22 23:58:13 mm vdr[20433]: pcount in cSectionHandler::Action:2000 Mar 22 23:58:14 mm vdr[20430]: pcount in cSectionHandler::Action:12215000 ... Mar 23 00:00:00 mm vdr[20426]: timer 1 (28 0000-0055 'Zimmer frei!') start Mar 23 00:00:00 mm vdr[20426]: record /video0/Zimmer_frei!/2005-03-23.00:00.50.99.rec ... Mar 23 10:35:25 mm vdr[20430]: pcount in cSectionHandler::Action:24078000 Mar 23 10:35:26 mm vdr[20433]: pcount in cSectionHandler::Action:6408000 Mar 23 10:35:29 mm vdr[20430]: pcount in cSectionHandler::Action:24079000 -- Wolfgang
