On Sun, 20 Mar 2005, Stefan Lucke wrote: > On Sonntag, 20. M?rz 2005 18:42, Klaus Schmidinger wrote: >> Timo Laitinen wrote: >>> Hi, >>> >>> I'm having some problems with the changing pids between programs with >>> different language specifications on the YLE mux in Finland. The problem >>> is that the pid changes a bit late on the program start, not during a >>> black screen. As a result, there is a short gap in the beginning of the >>> show, as vdr restarts the recording into a new file. The gap is >>> visible/hearable also on live tv, even without recording taking place. >>> The other muxes don't have this problem (their pids don't change). >>> ... >> >> I guess the best thing to do would be to complain to the broadcaster. >> The PIDs should be set correctly _before_ the programme starts. > >>> changing pids of channel 1 from 512+128:650=eng:2321 to 512+128:650=fin:2321 > > No, just a minor change in the description. To my opinion, that must > not result in retuning or interruption of recordings. > > I've some similar reported on 2004-12-04 > vdr-1.3.17, DVB-T, "changing transponder data of channel" > > changing transponder data of channel 15 from T:522000000:0:1:0:2:1:2:1 to T:522000000:0:1:0:2:2:2:1 I can confirm these messages for Berlin. I assume vdr gets this information from NIT (pid 0x10)? then again the broadcaster is doing something weird? Or is vdr using the get_frontend-ioctl? The flipping field is CoderateL, which afaik not in use anywhere in the world?! So normally it should be FEC_NONE as long as hierarchy is turned off. Maybe vdr should manually take care on that? regards, Patrick.
