Without further ado, the following was found: Issue: agetty → B<agetty> "Display the current issue file (or other) on the current terminal and exit. " "Use this option to review the current setting, it is not designed for any " "other purpose. Note that output may use some default or incomplete " "information as proper output depends on terminal and agetty command line." "Try to keep the existing baud rate. The baud rates from the command line are " "used when B<agetty> receives a BREAK character. If another baud rates " "specified then the original baud rate is also saved to the end of the wanted " "baud rates list. This can be used to return to the original baud rate after " "unexpected BREAKs." "Since version 2.35 additional locations for issue file and directory are " "supported. If the default I</etc/issue> does not exist, then B<agetty> " "checks for I</run/issue> and I</run/issue.d>, thereafter for I</usr/lib/" "issue> and I</usr/lib/issue.d>. The directory I</etc> is expected for host " "specific configuration, I</run> is expected for generated stuff and I</usr/" "lib> for static distribution maintained configuration."
