On Fri, Dec 14, 2018 at 11:53:52AM -0600, Hank Barta wrote: > I have an issue where `gparted` seems to display incorrect information > on my system drive (and `parted` seems to report correct information.) > I filed a bug on Launchpad (since this manifests on Ubuntu 18.10) > https://bugs.launchpad.net/ubuntu/+source/gparted/+bug/1808421 and was > directed to https://gitlab.gnome.org/GNOME/gparted/issues/14 which > does appear to be the same issue. Near the end of the first link is > information I collected when running Ubuntu 18.04 (from `blkid` and > `wipefs`) > > I have found that when this system is running Debian Stretch from USB > that `gparted` appears to produce the correct output. Below is the > same information collected when running Debian Stretch. > > root@debian:/home/user# apt policy util-linux > util-linux: > Installed: 2.29.2-1+deb9u1 > Candidate: 2.29.2-1+deb9u1 > Version table: > *** 2.29.2-1+deb9u1 500 > 500 http://deb.debian.org/debian stretch/main amd64 Packages > 100 /var/lib/dpkg/status > root@debian:/home/user# blkid /dev/sda > /dev/sda: LABEL="rpool" UUID="4510611204828545482" > UUID_SUB="9816084798696086204" TYPE="zfs_member" > PTUUID="eba09d2e-0f70-4d11-8e37-c1c170cfd9dd" PTTYPE="gpt" > root@debian:/home/user# wipefs --no-act /dev/sda > offset type > ---------------------------------------------------------------- > 0x200 gpt [partition table] > > 0xe8e0d3f000 zfs_member [filesystem] > LABEL: rpool > UUID: 4510611204828545482 > > root@debian:/home/user# > > I would like to know if this identifies a problem in the partition > table or an issue with `blkid`. (Or something else?) > I don't think I installed a ZFS pool on the entire disk but I could be > wrong about that. It is also possible that one of my operations did > cause a problem with the partition table. It seems like disk originally formatted as ZFS has been later partitioned by GPT. In this case it does not seem like false positive ZFS detection. You need ZFS magic string and guid= (aka UUID_SUB), pool_guid= (aka UUID) and name= (aka LABEL) variable names and data on the right offsets. > This is a test system and relatively new install so it would not be a > huge problem to 'nuke and repave' if that is necessary to fix this or > to try anything that can further identify the problem. > > Suggestions on what I should do next are most welcome! The ideal is to use partitioning tools that wipe the disk before it writes partition table. Or use "wipefs -a" to cleanup all from the disk before you use it (this is recommended step during system installation). For now you can use "wipefs -o 0xe8e0d3f000" to remove only the unwanted ZFS stuff. Karel -- Karel Zak <kzak@xxxxxxxxxx> http://karelzak.blogspot.com
