Hi, On Tue, 2025-03-11 at 11:50 +0100, Jonas Rebmann wrote: > Configure the RESET_CTRL register of the pca9450 pmic in the driver, > like u-boot and kernel do. Subsequently, remove the setup of this > register from the pca9450_register_init_callback of the two imx93 boards > we currently have. Does it make sense to select the pcs9450 in the board kconfig symbols? This way users retain the behaviour after an update even if the pca9450 driver was not selected before. > Configuration of this register in lowlevel.c of the imx8 boards remains > untouched for now as they use a larger array of pmic register setups > which I haven't given a closer look as to which is actually needed given > the defaults and what's done in the driver already. > > Signed-off-by: Jonas Rebmann <jre@xxxxxxxxxxxxxx> > --- > Jonas Rebmann (2): > mfd: pca9450: configure pmic reset behavior > ARM: boards: remove obsolete PCA9450_RESET_CTRL setup > > arch/arm/boards/phytec-phycore-imx93/board.c | 9 --------- > arch/arm/boards/tqma93xx/board.c | 3 --- > drivers/mfd/pca9450.c | 11 +++++++++++ > include/mfd/pca9450.h | 4 ++++ > 4 files changed, 15 insertions(+), 12 deletions(-) > --- > base-commit: d004da6e3710cc01b645a57c8dd1a986eced1c80 > change-id: 20250311-pca9450-wdog-b9458f1a26ff > > Best regards, Best regards, Rouven
