Hi ALexander, On Thu, Feb 27, 2025 at 09:37:37AM +0300, Alexander Shiyan wrote: > Hello All. > > I found that automounting does not work without a GPT table. So you mean it doesn't work when the device has a MBR instead of a GPT? > In the example below, it is not possible to automatically mount a > partition from an MMC card. > However, if I add the full paths to the command manually, everything works. > > barebox 2025.02.0-00690-ga6a0a0ba4f61 #12 Thu Feb 27 08:27:56 MSK 2025 > Board: Mega-Milas MM-SM-SAMA5D2 > AT91: Detected soc type: sama5d2 > AT91: Detected soc subtype: sama5d27c_d1g > ... > sdhci-at91 b0000000.sdio-host@xxxxxxxxxxx: registered as mmc1 > mmc1: detected SD card version 2.0 > mmc1: registered mmc1 > ... > barebox@Mega-Milas Informer SAMA5D2:/ ls /mnt/mmc1.0 > mount: Device or resource busy -EBUSY is a strange error code from mount(). Can you follow where it comes from? I can't reproduce it here. I tried both with a MBR and a GPT. Sascha -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
