From: Ahmad Fatoum <ahmad@xxxxxx>
The only file including this has been removed, so this can go away as
well.
Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
---
drivers/serial/serial_pl010.h | 80 -----------------------------------
1 file changed, 80 deletions(-)
delete mode 100644 drivers/serial/serial_pl010.h
diff --git a/drivers/serial/serial_pl010.h b/drivers/serial/serial_pl010.h
deleted file mode 100644
index ba81a66da03a..000000000000
--- a/drivers/serial/serial_pl010.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/* SPDX-FileCopyrightText: 2003, 2004 ARM Ltd. */
-/* SPDX-FileCopyrightText: 2010 Matthias Kaehlcke <matthias@xxxxxxxxxxxx> */
-
-/* Contributor: Philippe Robin <philippe.robin@xxxxxxx> */
-
-struct hldc_struct {
- uint32_t ctrl;
- uint32_t addmtchval;
- uint32_t addmask;
- uint32_t rxinfobuf;
- uint32_t sts;
-};
-
-struct pl010_struct {
- uint32_t data;
- union {
- uint32_t rxsts;
- uint32_t errclr;
- };
- uint32_t linctrlhigh;
- uint32_t linctrlmid;
- uint32_t linctrllow;
- uint32_t ctrl;
- uint32_t flag;
- union {
- uint32_t intid;
- uint32_t intclr;
- };
- uint32_t not_used0[2];
- uint32_t dmactrl;
- uint32_t not_used1[53];
- uint32_t modemctrl;
- uint32_t modemsts;
- uint32_t not_used2[65];
- struct hldc_struct hldc;
-};
-
-#define UART_PL010_RSR_OE (1 << 3)
-#define UART_PL010_RSR_BE (1 << 2)
-#define UART_PL010_RSR_PE (1 << 1)
-#define UART_PL010_RSR_FE (1 << 0)
-
-#define UART_PL010_FR_TXFE (1 << 7)
-#define UART_PL010_FR_RXFF (1 << 6)
-#define UART_PL010_FR_TXFF (1 << 5)
-#define UART_PL010_FR_RXFE (1 << 4)
-#define UART_PL010_FR_BUSY (1 << 3)
-#define UART_PL010_FR_TMSK (UART_PL010_FR_TXFF + UART_PL010_FR_BUSY)
-
-#define UART_PL010_CR_LPE (1 << 7)
-#define UART_PL010_CR_RTIE (1 << 6)
-#define UART_PL010_CR_TIE (1 << 5)
-#define UART_PL010_CR_RIE (1 << 4)
-#define UART_PL010_CR_MSIE (1 << 3)
-#define UART_PL010_CR_IIRLP (1 << 2)
-#define UART_PL010_CR_SIREN (1 << 1)
-#define UART_PL010_CR_UARTEN (1 << 0)
-
-#define UART_PL010_LCRH_WLEN_8 (3 << 5)
-#define UART_PL010_LCRH_WLEN_7 (2 << 5)
-#define UART_PL010_LCRH_WLEN_6 (1 << 5)
-#define UART_PL010_LCRH_WLEN_5 (0 << 5)
-#define UART_PL010_LCRH_FEN (1 << 4)
-#define UART_PL010_LCRH_STP2 (1 << 3)
-#define UART_PL010_LCRH_EPS (1 << 2)
-#define UART_PL010_LCRH_PEN (1 << 1)
-#define UART_PL010_LCRH_BRK (1 << 0)
-
-#define UART_PL010_BAUD_460800 1
-#define UART_PL010_BAUD_230400 3
-#define UART_PL010_BAUD_115200 7
-#define UART_PL010_BAUD_57600 15
-#define UART_PL010_BAUD_38400 23
-#define UART_PL010_BAUD_19200 47
-#define UART_PL010_BAUD_14400 63
-#define UART_PL010_BAUD_9600 95
-#define UART_PL010_BAUD_4800 191
-#define UART_PL010_BAUD_2400 383
-#define UART_PL010_BAUD_1200 767
--
2.39.5
