Re: [PATCH] ARM: at91: Compile aic.c for SAMA5D2 only

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04.12.24 10:14, Alexander Shiyan wrote:
> at91_aic_redir() is only used for sama5d2 based SOCs.
> 
> Signed-off-by: Alexander Shiyan <eagle.alexander923@xxxxxxxxx>

Reviewed-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>

> ---
>  arch/arm/mach-at91/Makefile | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
> index 7d7f27749f..ccbe3c425c 100644
> --- a/arch/arm/mach-at91/Makefile
> +++ b/arch/arm/mach-at91/Makefile
> @@ -1,6 +1,6 @@
>  # SPDX-License-Identifier: GPL-2.0-only
>  
> -obj-y += setup.o aic.o
> +obj-y += setup.o
>  lwl-y += at91_pmc_ll.o ddramc_ll.o at91sam9_sdramc_ll.o matrix.o
>  lwl-$(CONFIG_CLOCKSOURCE_ATMEL_PIT) += early_udelay.o
>  
> @@ -33,7 +33,7 @@ obj-$(CONFIG_SOC_SAMA5D4)	+= sama5d4.o sama5d4_devices.o
>  endif
>  lwl-$(CONFIG_SOC_AT91SAM9263)	+= sam9263_ll.o
>  lwl-$(CONFIG_SOC_SAMA5D2)	+= sama5d2_ll.o
> -obj-$(CONFIG_SOC_SAMA5D2)	+= sama5d2.o
> +obj-$(CONFIG_SOC_SAMA5D2)	+= aic.o sama5d2.o
>  lwl-$(CONFIG_SOC_SAMA5D3)	+= sama5d3_ll.o
>  obj-$(CONFIG_SOC_AT91SAM9G20) += at91sam9260.o at91sam9260_devices.o
>  obj-$(CONFIG_SOC_AT91SAM9G45) += at91sam9g45.o at91sam9g45_devices.o


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |




[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux