On Tue, Dec 03, 2024 at 07:28:24PM +0100, Ahmad Fatoum wrote: > You can enable it for barebox.bin too, but enabling it for MLO only > should work too. Okay. > > 2~�W-�,-H] > > ���k�ҫ�.LWC�C�C��arebox 2024.10.0-00152-g53c99b9f550b-dirty #15 Mon Dec 2 15:07:37 CET 2024 > > Hmm, CONFIG_BAUDRATE is set correctly? CONFIG_BAUDRATE=115200, never changed that. > If it doesn't work at a later place, it won't work when you move it > earlier. I have a BBB here, so I can give enabling DEBUG_LL a try Ou, then I have misunderstood one of your intial mails where I thought moving it earlier should change something, if RAM setup fails getting an output eventually despite of that. > too if you get stuck. I manage to get DEBUG_LL on and run it, but the only difference is the scrambled output in my terminal on powerup boot or when resetting with "my cold restart" modification. But wait, I do not know if it as glitch, when CONFIG_LL_DEBUG is on and I power on, I see a "2" immediately put out in terminal prepended first. When the system gets stuck it does it in a way I do not see anything with or without enabled in stuck case. I extremely appreciate your help getting CONFIG_LL_DEBUG run. I can support with a dozen of BBBs within a day to your office, its nearly on my way from my home to my work :-D Regards Konsti -- INSIDE M2M GmbH Konstantin Kletschke Berenbosteler Straße 76 B 30823 Garbsen Telefon: +49 (0) 5137 90950136 Mobil: +49 (0) 151 15256238 Fax: +49 (0) 5137 9095010 konstantin.kletschke@xxxxxxxxxxxxx http://www.inside-m2m.de Geschäftsführung: Michael Emmert, Derek Uhlig HRB: 111204, AG Hannover
