On Mon, 04 Nov 2024 14:04:23 +0100, Sascha Hauer wrote:
> During 1st stage boot barebox is running in OCRAM. This OCRAM is
> occupied by the TF-A once started, so move the handoff-data to SDRAM
> before starting the TF-A.
>
> Currently no board is using handoff-data from its early board code, so
> this is not yet necessary, but done now so that board code is able to
> use handoff-data in the future.
>
> [...]
Applied, thanks!
[1/1] ARM: i.MX: move handoff-data out of OCRAM
https://git.pengutronix.de/cgit/barebox/commit/?id=0e945328e46b (link may not be stable)
Best regards,
--
Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
