Hello Sebastien, Thanks for your fix. On 31.10.24 10:27, Sebastien Bourdelin wrote: > From: Sebastien Bourdelin <sebastien.bourdelin@xxxxxxxx> > > As mentionned in the Raspberry Pi4 bootrom Changelog [1]: > "Increase timeout of early SD/EMMC commands to 100ms". > The BCM2711 SDHCI can take up to 100ms to complete a command. > > Without this change, we had noticed that Barebox sometime stay stucked > on a timeout error while trying to boot Linux from the eMMC. > > [1] https://github.com/raspberrypi/rpi-eeprom/blob/master/firmware-2711/release-notes.md#2022-03-10---promote-the-2022-03-10-beta-release-to-lateststable > > Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@xxxxxxxx> Reviewed-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> Cheers, Ahmad > --- > drivers/mci/mci-bcm2835.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/drivers/mci/mci-bcm2835.c b/drivers/mci/mci-bcm2835.c > index cbf99ee7ca..3b086ed22c 100644 > --- a/drivers/mci/mci-bcm2835.c > +++ b/drivers/mci/mci-bcm2835.c > @@ -128,6 +128,10 @@ static int bcm2835_mci_request(struct mci_host *mci, struct mci_cmd *cmd, > block_data |= data->blocksize; > } > > + /* BCM2xxx SDHCI might take up to 100ms to complete a command */ > + if (cmd != NULL) > + cmd->busy_timeout = 100; > + > ret = sdhci_wait_idle_data(&host->sdhci, cmd); > if (ret) > return ret; -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
