On 22.10.24 09:46, Sascha Hauer wrote: > Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> Reviewed-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> > --- > Documentation/boards/layerscape.rst | 13 +++++++++++-- > 1 file changed, 11 insertions(+), 2 deletions(-) > > diff --git a/Documentation/boards/layerscape.rst b/Documentation/boards/layerscape.rst > index ae089539e5..5791b86326 100644 > --- a/Documentation/boards/layerscape.rst > +++ b/Documentation/boards/layerscape.rst > @@ -37,13 +37,22 @@ Flashing to the eMMC is possible likewise:: > In such a case, using eMMC and SD-Card at the same time is not possible. > Boot from QSPI to flash the eMMC. > > +Get and Build the Trusted Firmware A > +------------------------------------ > + > +Get TF-A from https://github.com/ARM-software/arm-trusted-firmware.git and build with:: > + > + make PLAT=ls1046ardb > + cp build/ls1046ardb/release/bl31.bin ${barebox_srctree}/firmware/ls1046a-bl31.bin > + > +Although the binary is for a specific board (LS1046A-RDB) it should work on any other > +board as well. > + > Firmware Blobs > -------------- > > Network: `fsl_fman_ucode_ls1046_r1.0_106_4_18.bin <https://github.com/NXP/qoriq-fm-ucode/raw/integration/fsl_fman_ucode_ls1046_r1.0_106_4_18.bin>`_. > > -PSCI Firmware: `ppa-ls1046a.bin <https://github.com/NXP/qoriq-ppa-binary/raw/integration/soc-ls1046/ppa.itb>`_. > - > Layerscape boards > ----------------- > > -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |