Hi All,
I just released barebox-2024.08.0. Some notable changes include that
barebox now has class devices. The user visible change is that there
now is a 'class' command which shows the registered classes along with
the devices registered on this class. This is useful to have a single
simple command to show which network, watchdog and RTC devices are
present.
Also Ahmad added a 'watch' command which like its Linux pendant
periodically calls a command and makes it easy to catch changes in the
output.
Stefan has made the MMC/SD info like manufacturing date and product name
more accessible to scripts. Instead of only printing them on devinfo
we now have device parameters as well.
For other changes see below for a full list of patches.
Have Fun!
Sascha
----------------------------------------------------------------
Ahmad Fatoum (54):
string: inline isempty
string: add nonempty helper
Documentation: state: add real-world example for stride size calculation
ARM: stm32mp: remove unused hardcoded MMIO address constants
ARM: lib32: semihosting: prepare for more general use
firmware: semihosting: add ARMv8-A semihosting support
firmware: semihosting: don't return error code from writec/write0
firmware: semihosting: translate return values in wrappers
ARM: semihosting: add DEBUG_LL implementation
serial: add semihosting console
watchdog: bcm2835: add support for powering off SoC
test: arm: describe Qemu Raspberry Pi 3b labgrid environment
serial: replace all clk_get with clk_get_for_console
misc: add /dev/port device for I/O ports
mci: core: remove dev_add_param_bool error paths
mci: core: don't add broken_cd parameter for eMMCs
of: platform: early exit on error
e1000: mtd: remove needless error checking for device parameter
PWM: core: remove needless error checking for device parameter
fpga: bridge: remove needless error checking for device parameter
pinctrl: import <linux/pinctrl/pinconf-generic.h> header
pinctrl: rockchip: make use of pinconf-generic.h
pinctrl: rockchip: use of_property_read_bool()
pinctrl: rockchip: add support for configuring schmitt trigger
pinctrl: rockchip: add support for bias-pull-pin-default
rtc: register RTC class to collect devices
gpiolib: implement of_gpio_get_chip_by_alias
pinctrl: rockchip: add support for configuring GPIO direction
include: gfp: move flags into <linux/gfp.h>
include: common.h: move barebox version/info declarations to new header
mci: core: drop unused parameter members from struct mci
fs: pstore: ram_core: use pr_err, not pr_info, for errors
rtc: add PCF85063 RTC and NVMEM support
efi: payload: inform users on attempt to boot non EFI-stubbed kernel
bbu: command: update via TFTP if no image given
commands: edit: factor out getwinsize and export it for reuse
lib: strtox: implement new simple_strtofract
commands: watch: add new command
ARM: dts: imx8mp-skov: describe RTC
usb: Use well-known descriptor sizes when parsing configuration
globalvar: align parameter names in prototype with definition
misc: port: bump down debugging print from notice
environment: don't leak environment path buffer
partition: fix use of uninitialized variable in error message
of: fdt: harden against corrupted reserve map entries
resource: return NULL for error in request_barebox_region
ARM: i.MX8M: scratch: fix initcall return code on request_barebox_region error
RISC-V: cpu: fix initcall return code on request_barebox_region error
ARM: i.MX8MP: tqma8mpxl: fix eMMC barebox update handler
dma: debug: fix compiler warning about pointer u64 cast
usb: gadget: fsl_udc: dma_map buffers instead of using dma_sync
of: fdt: fix overflows when parsing sizes
optee: include linux/limits.h to define U64_MAX
usb: xhci: fix erroneous USB_DT_CONFIG descriptor size
Alexander Shiyan (4):
scripts/rk-usb-loader: Add support for rk3588
mfd: rk808: Abstracting childs from the interface being used
regulator: Add Fairchild FAN53555 driver
commands: cpuinfo: Add Cortex-A55 information
Antony Pavlov (5):
MIPS: don't pass fdt_size into main_entry()
MIPS: pbl_main_entry(): inline barebox_uncompress()
MIPS: rename pbl_main_entry() -> barebox_pbl_start()
gitignore: ignore *.dtbo and *.dtbo.*
Documentation: boards: stm32mp: fix DK-1/DK-2 DIP switch formatting
David Jander (4):
spi: stm32: avoid enabling SPI in setup to allow register configuration
arm: boards: Add support for Protonic MECIO1 board
arm: boards: Add support for Protonic MECT1S board
net: phy: dp83tg720: wake up PHYs in managed mode
Denis Orlov (1):
MIPS: use more consistent type for memory size values
Jules Maselbas (3):
mci: core: clarify why write_bl_len is the same as read_bl_len
mci: core: clarify comment on MMC version detection
mci: core: fix typos
Marco Felsch (3):
ARM: aarch64: align scr_el3 register setup with U-Boot
ARM: i.MX8M: add support to handle ROM SError ERR050350
i.MX: HABv4: fix SRK_LOCK for i.MX8M devices
Oleksij Rempel (10):
gpiolib: extend support for non-zero offset GPIO banks
pinctrl: stm32: extract and set GPIO offset from devicetree
phy: avoid adjust_link call if link remains down
ARM: dts: stm32mp151-prtt1c: sync with the kernel dts
net: sja1105: split adjust_link into reusable functions
net: sja1105: add function to configure CPU port
of: add sanity check for machine compatible string
net: phy: Add support for PHY-specific link polling interval and randomization
net: phy: dp83tg720: Decouple PHY reset frequency from link polling interval
spi: atmel_spi: Fix GPIO-based chip select handling to support multiple valid entries
Richard Weinberger (1):
ext4: Fix integer overflow in ext4fs_read_symlink()
Sascha Hauer (41):
net: cs8900: simplify buffer read loop
net: cs8900: do not read past the receive buffer
net: ks8851_mll: do not read past the receive buffer
net: liteeth: do not read past the receive buffer
net: liteeth: do not set len to 0 before printing it
net: smc911x: Fix amount of words read from RX FIFO
dts: update to v6.10-rc1
net: smc911x: do not read past the receive buffer
net: ks8851_mll: drop return value from ks8851_rx_frame()
net: let net rx hook return void
clk: imx27: sync with kernel
ARM: Phytec-phyCARD-imx27: switch to deep probe
ARM: Phytec-phyCARD-imx27: register USB from device tree
usb: ulpi: add more ulpi ids
dts: update to v6.10-rc2
dts: update to v6.10-rc3
net: virtio-net: allow to set current MAC address
net: ifup: use accessor to set network device ip/netmask
net: add edev argument to net_set_gateway()
net: establish single code path for setting edev parameters
net: host command: move to commands/
net: use for_each_netdev()
base: add class device support
net: register eth class
watchdog: register watchdog class
dts: update to v6.10-rc4
dts: update to v6.10-rc5
dts: update to v6.10-rc6
Merge branch 'for-next/arria10'
Merge branch 'for-next/class'
Merge branch 'for-next/dts'
Merge branch 'for-next/imx'
Merge branch 'for-next/mips'
Merge branch 'for-next/misc'
Merge branch 'for-next/mmc'
Merge branch 'for-next/net'
Merge branch 'for-next/semihosting'
mtd: rawnand: Ensure ECC configuration is propagated to upper layers
mtd: nand: mxc_nand: always copy_spare() for page write
optee: ioctl takes unsigned int argument
Release v2024.08.0
Stefan Kerkmann (9):
mci: core: rename mtd to mdt
mci: core: add cbx extraction function
mci: core: add product name extraction function
mci: core: add manufacturing date extraction function
mci: core: parse cid into parameters
mci: core: fix extract_prv and write to string buffer
mci: core: add CBX field as parameter and print it
mci: core: fix extract_oid and write to string buffer
mci: core: add missing slice range for extract_psn function
Stefano Manni (1):
habv4: ignore engine failure due to RNG self-test in
Steffen Trumtrar (14):
ARM: arria10: system-manager: add handoff registers
ARM: Arria10: reset manager: document reset source
ARM: socfpga: Arria10: PE1: remove arm_cpu_lowlevel_init
ARM: arria10: reset-manager: don't touch l4 wdog
ARM: Arria10: xload: rework __arria10_load_fpga
ARM: arria10: xload: fix __arria10_load_fpga
ARM: Arria10: xload: kick watchdog
ARM: Arria10: PE1: disable l4wd0 in bringup
ARM: arria10: mark image in OCRAM as valid
ARM: Arria10: arria10_finish_io: remove unused param
ARM: Arria10: xload: remove useless writel
ARM: Arria10: xload: refactor wait loops
ARM: Arria10: xload: reduce timeout on condone
ARM: arria10-xload: rework broken bitstream handling
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
