The kernel device trees for the platform already describe the RTC, so
let's do the same in barebox as well.
Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
---
arch/arm/dts/imx8mp-skov.dts | 39 ++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm/dts/imx8mp-skov.dts b/arch/arm/dts/imx8mp-skov.dts
index 3761da89cae7..6e21b81c30a1 100644
--- a/arch/arm/dts/imx8mp-skov.dts
+++ b/arch/arm/dts/imx8mp-skov.dts
@@ -33,6 +33,7 @@ aliases {
ethernet1 = &lan1;
ethernet2 = &lan2;
state = &state;
+ rtc0 = &i2c_rtc;
};
leds {
@@ -322,6 +323,24 @@ ldo5: LDO5 {
};
};
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c3>, <&pinctrl_i2c3_gpio>;
+ scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ i2c_rtc: rtc@51 {
+ compatible = "nxp,pcf85063tp";
+ reg = <0x51>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc>;
+ interrupts-extended = <&gpio4 31 IRQ_TYPE_EDGE_FALLING>;
+ quartz-load-femtofarads = <12500>;
+ };
+};
+
&i2c4 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -493,6 +512,20 @@ MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2
>;
};
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2
+ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2
+ >;
+ };
+
+ pinctrl_i2c3_gpio: i2c3gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x400001c2
+ MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x400001c2
+ >;
+ };
+
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3
@@ -500,6 +533,12 @@ MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3
>;
};
+ pinctrl_rtc: rtcgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x41
+ >;
+ };
+
pinctrl_switch: switchgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x41
--
2.39.2
