This is a part of .config: CONFIG_DIGEST_SHA1_ARM64_CE=y # CONFIG_DIGEST_SHA256_ARM64_CE is not set пт, 28 июн. 2024 г. в 17:27, Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>: > > On 28.06.24 16:03, Alexander Shiyan wrote: > > Yes. > > Call trace is different, but the barebox still crashes. > > > > Unknown/Uncategorized exception (ESR 0x02000000) at 0xbf92b728aba34bf3 > > elr: 00000000efd7da48 lr : 00000000efd7d7e0 > > x0 : 00000000afdc1b10 x1 : 00000000afdc1b70 > > x2 : 0000000000000000 x3 : 0000000000000020 > > x4 : 0000000000000000 x5 : 00000000efff7dd8 > > x6 : 00000000ca62c1d6 x7 : 0000000000000000 > > x8 : 00000000afdc1b68 x9 : 0000000000000000 > > x10: 0000000000000000 x11: 00000000fffffff6 > > x12: 00000000fffffff6 x13: 0000000000000020 > > x14: 0000000000000000 x15: 0000000000000003 > > x16: 00000000efff7968 x17: 0000000000000003 > > x18: 00000000efff7ef0 x19: 0000000000000001 > > x20: 00000000afdc1b30 x21: 00000000afdc1b10 > > x22: 00000000afdc1b30 x23: 00000000ef600000 > > x24: 0000000000b35a40 x25: 0000000000080051 > > x26: 0000000000106858 x27: 00000000effe0000 > > x28: 0000000000000000 x29: 00000000efff7e40 > > > > Call trace: > > [<efd7da48>] (sha1_ce_transform+0x64/0x224) from [<efd7d8b0>] > > (sha1_ce_final+0xbc/0x114) > > sha1_ce_transform is defined in sha1-ce-core.S and that's only built > when CONFIG_DIGEST_SHA1_ARM64_CE is enabled, so I don't understand > how it could be that you disable CONFIG_DIGEST_SHA1_ARM64_CE > (not SHA256) and still run into that error? > > Cheers, > Ahmad > > > [<efd7d8b0>] (sha1_ce_final+0xbc/0x114) from [<efd0297c>] > > (machine_id_set_globalvar+0x7c/0x100) > > [<efd0297c>] (machine_id_set_globalvar+0x7c/0x100) from [<efd01adc>] > > (start_barebox+0x60/0x8c) > > [<efd01adc>] (start_barebox+0x60/0x8c) from [<efd7bf1c>] > > (barebox_non_pbl_start+0x11c/0x150) > > [<efd7bf1c>] (barebox_non_pbl_start+0x11c/0x150) from [<efd0000c>] > > (__bare_init_start+0x0/0x14) > > [<efd0000c>] (__bare_init_start+0x0/0x14) from [<00b01d94>] (0xb01d94) > > [<00b01d94>] (0xb01d94) from [<00b01648>] (0xb01648) > > panic: unhandled exception > > ### ERROR ### Please RESET the board ### > > > > пт, 28 июн. 2024 г. в 16:59, Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>: > >> > >> On 28.06.24 15:56, Alexander Shiyan wrote: > >>> I changed the patch to reflect this for rk3568 rather than rk3588. > >>> The patch doesn't help. I tried it with and without the > >>> CONFIG_DIGEST_SHA256_ARM64_CE option. > >> > >> Do you still get a crash when CONFIG_DIGEST_SHA1_ARM64_CE is disabled? > >> > >> Cheers, > >> Ahmad > >> > >>> > >>> ... > >>>>>>> I'm trying to use the open source TF-A implementation for the Rockchip > >>>>>>> rk3568 CPU: > >>>>>>> https://github.com/ARM-software/arm-trusted-firmware/commit/9fd9f1d024872b440e3906eded28037330b6f422 > >>> ... > >>>>>> Assuming this stack trace is accurate, it looks like the crypto extensions > >>>>>> use may upset the CPU? Do you have CONFIG_DIGEST_SHA256_ARM64_CE enabled? > >>>>>> Does this issue happen when you disable it? > >>>>> > >>>>> The error is still here. New log (without CONFIG_DIGEST_SHA256_ARM64_CE) below. > >>>>> > >>>>>> Did you call rk3588_lowlevel_init() in your entry point? > >>>>> RK3568 :) > >>>>> Yes, it called from rk3568_barebox_entry(). > >>>>> > >>>>> > >>>>> Board: Diasom DS-RK3568-EVB > >>>>> deep-probe: supported due to diasom,ds-rk3568-evb > >>>>> rockchip-dmc memory-controller.of: Detected memory size: 0x0000000200000000 > >>>>> netconsole: registered as netconsole-1 > >>>>> rk808 rk8090: chip id: 0x8090 > >>>>> vdd_npu: Bringing 500000uV into 850000-850000uV > >>>>> vdda0v9_image: Bringing 600000uV into 900000-900000uV > >>>>> vcca1v8_image: Bringing 600000uV into 1800000-1800000uV > >>>>> rockchip_saradc fe720000.saradc@xxxxxxxxxxx: registered as aiodev0 > >>>>> Boot source: usb, instance 0 > >>>>> psci psci.of: detected version 1.1 > >>>>> xHCI xHCI0: USB XHCI 1.10 > >>>>> mdio_bus: miibus0: probed > >>>>> dw_mmc fe2b0000.mmc@xxxxxxxxxxx: registered as mmc0 > >>>>> rk3568-dwcmshc-sdhci fe310000.mmc@xxxxxxxxxxx: registered as mmc1 > >>>>> mmc1: detected MMC card version 5.1 > >>>>> mmc1: registered mmc1.boot0 > >>>>> mmc1: registered mmc1.boot1 > >>>>> mmc1: registered mmc1 > >>>>> mdio_bus: miibus1: probed > >>>>> Setup Machine ID from EMMC serial: 30948368 > >>>>> Unknown/Uncategorized exception (ESR 0x02000000) at 0xbf96b7282ba34bf3 > >>>>> elr: 00000000efd7da48 lr : 00000000efd7d7e0 > >>>>> x0 : 00000000afdc1b10 x1 : 00000000afdc1b70 > >>>>> x2 : 0000000000000000 x3 : 0000000000000020 > >>>>> x4 : 0000000000000000 x5 : 00000000efff7dd8 > >>>>> x6 : 00000000ca62c1d6 x7 : 0000000000000000 > >>>>> x8 : 00000000afdc1b68 x9 : 0000000000000000 > >>>>> x10: 0000000000000000 x11: 00000000fffffff6 > >>>>> x12: 00000000fffffff6 x13: 0000000000000020 > >>>>> x14: 0000000000000000 x15: 0000000000000003 > >>>>> x16: 00000000efff7968 x17: 0000000000000003 > >>>>> x18: 00000000efff7ef0 x19: 0000000000000001 > >>>>> x20: 00000000afdc1b30 x21: 00000000afdc1b10 > >>>>> x22: 00000000afdc1b30 x23: 00000000ef600000 > >>>>> x24: 0000000000b35a40 x25: 0000000000080051 > >>>>> x26: 0000000000106858 x27: 00000000effe0000 > >>>>> x28: 0000000000000000 x29: 00000000efff7e40 > >>>>> > >>>>> Call trace: > >>>>> [<efd7da48>] (sha1_ce_transform+0x64/0x224) from [<efd7d8b0>] > >>>>> (sha1_ce_final+0xbc/0x114) > >>>>> [<efd7d8b0>] (sha1_ce_final+0xbc/0x114) from [<efd0297c>] > >>>>> (machine_id_set_globalvar+0x7c/0x100) > >>>>> [<efd0297c>] (machine_id_set_globalvar+0x7c/0x100) from [<efd01adc>] > >>>>> (start_barebox+0x60/0x8c) > >>>>> [<efd01adc>] (start_barebox+0x60/0x8c) from [<efd7bf1c>] > >>>>> (barebox_non_pbl_start+0x11c/0x150) > >>>>> [<efd7bf1c>] (barebox_non_pbl_start+0x11c/0x150) from [<efd0000c>] > >>>>> (__bare_init_start+0x0/0x14) > >>>>> [<efd0000c>] (__bare_init_start+0x0/0x14) from [<00b01d8c>] (0xb01d8c) > >>>>> [<00b01d8c>] (0xb01d8c) from [<00b01640>] (0xb01640) > >>>>> panic: unhandled exception > >>>>> ### ERROR ### Please RESET the board ### > >>>> > >>>> I expect that without CONFIG_DIGEST_SHA1_ARM64_CE, the crash goes away? > >>>> If yes, can you try out the patch I just Cc'd you on? > >>> > >> > >> -- > >> Pengutronix e.K. | | > >> Steuerwalder Str. 21 | http://www.pengutronix.de/ | > >> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > >> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > >> > > > > -- > Pengutronix e.K. | | > Steuerwalder Str. 21 | http://www.pengutronix.de/ | > 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | >
