Re: [PATCH 1/3] net: phy: allow PHY drivers to implement their own software reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 23.05.24 16:40, Stefan Kerkmann wrote:
> This is a port of linux commit 9df81dd7583d14862d0cfb673a941b261f3b2112
> ("net: phy: allow PHY drivers to implement their own software reset")
> which implements the ability for phy drivers to implement the own
> non-standard software reset sequence.
> 
> A side effect is that fixups will now applied always even if
> .config_init is undefined. This shouldn't be possible to happen though,
> because phy_driver_register will populate the member with
> genphy_config_init in that case, so the member should never be NULL.
> 
> Signed-off-by: Stefan Kerkmann <s.kerkmann@xxxxxxxxxxxxxx>

Reviewed-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>

> ---
>  drivers/net/phy/phy.c | 16 ++++++++++++++--
>  include/linux/phy.h   |  5 +++++
>  2 files changed, 19 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> index abd78b2c80..a83f183302 100644
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -1108,14 +1108,26 @@ int phy_init_hw(struct phy_device *phydev)
>  	struct phy_driver *phydrv = to_phy_driver(phydev->dev.driver);
>  	int ret;
>  
> -	if (!phydrv || !phydrv->config_init)
> +	if (!phydrv)
>  		return 0;
>  
> +	if (phydrv->soft_reset) {
> +		ret = phydrv->soft_reset(phydev);
> +		if (ret < 0)
> +			return ret;
> +	}
> +
>  	ret = phy_scan_fixups(phydev);
>  	if (ret < 0)
>  		return ret;
>  
> -	return phydrv->config_init(phydev);
> +	if (phydrv->config_init) {
> +		ret = phydrv->config_init(phydev);
> +		if (ret < 0)
> +			return ret;
> +	}
> +
> +	return 0;
>  }
>  
>  static struct phy_driver genphy_driver = {
> diff --git a/include/linux/phy.h b/include/linux/phy.h
> index 7da4f94e0e..a6b96a5984 100644
> --- a/include/linux/phy.h
> +++ b/include/linux/phy.h
> @@ -275,6 +275,11 @@ struct phy_driver {
>  	const void *driver_data;
>  	bool is_phy;
>  
> +	/**
> +	 * @soft_reset: Called to issue a PHY software reset
> +	 */
> +	int (*soft_reset)(struct phy_device *phydev);
> +
>  	/*
>  	 * Called to initialize the PHY,
>  	 * including after a reset
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |





[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux